Suspension Wave & Delta Shim Collection - Sold in Packs of 10

Wave & Delta Shims

All rebuildable suspensions need shims & washers - Teknik has the largest collection with more than 2 million in stock. Our range includes bulk kits, ring shims, check shims, cup washers and valve stop washers; if you need to swap damping shims see our Shim Factor Calculator — one 0.30mm shim is NOT the same as two 0.15mm shims.

Fine-tune damping with wave and delta shims

  • Delta (triangle-cut) shims give softer initial damping by allowing oil to flow around cutouts
  • Wave washers act like a leaf spring to space shim stack elements until higher load flattens them
  • Mix ring shims, check shims and cup washers to shape low-, mid- and high-speed response
  • Essential rebuild parts: locknuts, teflon/acetal bushes, mid-speed springs and o-rings

Recommended Pairings

Consider matching shims with Suspension Tools. Also see fork locknuts & bushes, shock locknuts & bushes, our lock nuts and fasteners guide and the suspension fluid weights table.

Shop Wave & Delta Shims

Browse our selection of wave, delta and specialist shims to support reliable rebuilds and precise damping tuning.

7 Products Found
Teknik Motorsport

Delta Triangle Shim - 6 x 18 x .10

06mm id x 18mm od x 0.10mm Triangle
(SKU: 06.18.10D)
Inside Diameter d (mm):   6.0
Thickness (mm):   0.10
Outside Ø D (mm):   18.0
Shape:   Delta / Triangle
$0.94
6475 In Stock

Teknik Motorsport

Delta Triangle Shim - 6 x 20 x .10

06mm id x 20mm od x 0.10mm Triangle
(SKU: 06.20.10D)
Inside Diameter d (mm):   6.0
Thickness (mm):   0.10
Outside Ø D (mm):   20.0
Shape:   Delta / Triangle
$0.94
4295 In Stock

Teknik Motorsport

Delta Triangle Shim - 6 x 21 x .10

06mm id x 21mm od x 0.10mm Triangle
(SKU: 06.21.10D)
Inside Diameter d (mm):   6.0
Thickness (mm):   0.10
Outside Ø D (mm):   21.0
Shape:   Delta / Triangle
$0.94
3780 In Stock

Teknik Motorsport

Delta Triangle Shim - 6 x 22 x .10

06mm id x 22mm od x 0.10mm Triangle
(SKU: 06.22.10D)
Inside Diameter d (mm):   6.0
Thickness (mm):   0.10
Outside Ø D (mm):   22.0
Shape:   Delta / Triangle
$0.94
7850 In Stock

Teknik Motorsport

Delta Triangle Shim - 6 x 24 x .10

06mm id x 24mm od x 0.10mm Triangle
(SKU: 06.24.10D)
Inside Diameter d (mm):   6.0
Thickness (mm):   0.10
Outside Ø D (mm):   24.0
Shape:   Delta / Triangle
$0.94
6825 In Stock

Teknik Motorsport

Wave Washer - 8 x 14 x .10

08mm id x 14mm od x 0.10mm Thickness
(SKU: 08.14.10W)
Inside Diameter d (mm):   8.0
Thickness (mm):   0.10 Wave Washer
Outside Ø D (mm):   14.0
$0.94
3586 In Stock

Teknik Motorsport

Wave Washer - 8 x 14 x .15

08mm id x 14mm od x 0.15mm Thickness
(SKU: 08.14.15W)
Inside Diameter d (mm):   8.0
Thickness (mm):   0.15 Wave Washer
Outside Ø D (mm):   14.0
$0.94
Nil Stock
Notify Me

Wave & Delta Shims

All rebuildable suspensions need shims & washers - Teknik has the largest collection with more than 2 million in stock. Our range includes bulk kits, ring shims, check shims, cup washers and valve stop washers; if you need to swap damping shims see our Shim Factor Calculator — one 0.30mm shim is NOT the same as two 0.15mm shims.

Fine-tune damping with wave and delta shims

  • Delta (triangle-cut) shims give softer initial damping by allowing oil to flow around cutouts
  • Wave washers act like a leaf spring to space shim stack elements until higher load flattens them
  • Mix ring shims, check shims and cup washers to shape low-, mid- and high-speed response
  • Essential rebuild parts: locknuts, teflon/acetal bushes, mid-speed springs and o-rings

Recommended Pairings

Consider matching shims with Suspension Tools. Also see fork locknuts & bushes, shock locknuts & bushes, our lock nuts and fasteners guide and the suspension fluid weights table.

Shop Wave & Delta Shims

Browse our selection of wave, delta and specialist shims to support reliable rebuilds and precise damping tuning.