Parts

Displaying 91 - 120 of 149 Products

KYB Genuine Piston rod rcu inside bush 16mm

OEM KYB Japan
(SKU: 120431600101)

$7.96
5 In Stock

KYB Genuine Spring seat rcu steel 46mm

OEM KYB Japan
(SKU: 120444600301)

$40.51
10 In Stock

KYB Genuine Spring retainer alu 46mm for 16mm

OEM KYB Japan
(SKU: 120454600201)

$44.00
10 In Stock

KYB Genuine Bump rubber guide rcu YZ Gas Gas KXF

OEM KYB Japan
(SKU: 120460000601)

$38.50
1 In Stock

KYB Genuine Rear Shock Needle Bearing KYB HVA 11-13

OEM KYB Japan
(SKU: 120490000301)

$32.32
2 In Stock

HiCalibre Fork Springs 43.8 x 453 (Equivalent Eibach 968)

43.8mm od x 453mm free length
(SKU: 19-195)

Spring Rate: 0.38 kg/mm

$245.00
Nil Stock

Spring Rate: 0.40 kg/mm

$245.00
4 In Stock

Spring Rate: 0.42 kg/mm

$245.00
Nil Stock

Spring Rate: 0.44 kg/mm

$245.00
Nil Stock

Spring Rate: 0.46 kg/mm

$245.00
Nil Stock

Spring Rate: 0.48 kg/mm

$245.00
Nil Stock

Spring Rate: 0.50 kg/mm

$245.00
2 In Stock

Spring Rate: 0.52 kg/mm

$245.00
3 In Stock

Spring Rate: 0.54 kg/mm

$245.00
Nil Stock

Spring Rate: 0.56 kg/mm

$245.00
3 In Stock

Spring Rate: 0.60 kg/mm

$245.00
Nil Stock

Spring Rate: 0.65 kg/mm

$245.00
Nil Stock

Spring Rate: 0.58 kg/mm

$245.00
Nil Stock

Bump Stop Rubber 16 x 34 x 59

16mm id x 34mm od x 59mm tall - KYB
(SKU: 22-210-00)

Height H (mm): 59.0

Outside Ø D (mm): 34.0

$22.00
101 In Stock

Shock Oil Seal 16 x 28 x 5 Viton Hi Performance

16mm id x 28mm od x 5mm thick - Showa/KYB
(SKU: 22-401-00)

$18.98
71 In Stock

Shock Oil Seal 16 x 28 x 5

16mm id x 28mm od x 5mm thick - Showa/KYB/WP
(SKU: 22-401-01)

$13.20
409 In Stock

Late 16 x 28 x 5 KYB Shock Dust and Oil Seal Set

16mm id x 28mm od x 5mm thick
(SKU: 22-428-00)

$49.50
5 In Stock

M12 x 1.5 Thin Self Locking Steel Insert Fujilok

Self Locking Steel Insert Fujilok
(SKU: 22-625-00)

$4.98
4596 In Stock

M6 x 1.0 Thin Self Locking Steel Insert Fujilok

Self Locking Steel Insert Fujilok - Short
(SKU: 22-625-06)

$3.99
11035 In Stock

Outer Guide Bush 48 x 15 x 2.0 Aftermarket

48mm id x 15mm tall x 2.0mm thick
(SKU: 24-570-01)

Inside Diameter d (mm): 48.0

Fork Inner Tube Ø d (mm): 48.0

Height H (mm): 15.0

Outside Ø D (mm): 52.0

Wall Thickness (mm): 2.0

$6.60
692 In Stock

46mm 30 degree Angled Shock Bladder Cap - Red

46mm 30 degree
(SKU: 30-001-03)

Colour: Red

$49.50
12 In Stock

Colour: Blue

$49.50
15 In Stock

Colour: Black

$49.50
14 In Stock

1mm Shock Lowering Stop Washer

(SKU: 30-002-20)

$35.27
10 In Stock

All Balls Rear Shock Seal Kit- CR125/250/500/KXF250/450

16 ID 46OD
(SKU: 37-1004)

Shock Bore Ø D (mm): 46.0

Shock Shaft Ø D (mm): 16.0

Height H (mm): 21.5

$99.00
2 In Stock

Teknik Fork Springs 43.8 x 453 (Eibach 967 968)

43.8mm od x 453mm free length
(SKU: 43.8-453)

Spring Rate: 4.0 N/mm

$220.00
4 In Stock

Spring Rate: 4.2 N/mm

$220.00
15 In Stock

Spring Rate: 4.4 N/mm

$220.00
16 In Stock

Spring Rate: 4.6 N/mm

$220.00
15 In Stock

Spring Rate: 4.8 N/mm

$220.00
13 In Stock

Spring Rate: 5.0 N/mm

$220.00
14 In Stock

Spring Rate: 5.2 N/mm

$220.00
3 In Stock

4 In 1 Fork Cap Spanner Showa KYB WP 46 47 48 49 USD

Showa small - Showa large - KYB - WP
(SKU: 93-003-01)

$47.30
80 In Stock

Fork Seal Driver - 48mm

See Part # 93-009-00 for complete set
(SKU: 93-009-50)

$71.50
1 In Stock

16 x 12mm Shock Seal Head Bullet

Motorcycle Suspension Tools
(SKU: 93-025-00)

$19.95
75 In Stock

Eibach EMS Moto Fork Springs 44.0 x 455 (KYB 48 19-195)

44.0mm OD x 455mm Free Length
(SKU: 968)

Spring Rate: 0.38 kg/mm

$249.94
1 In Stock

Spring Rate: 0.40 kg/mm

$249.94
1 In Stock

Spring Rate: 0.42 kg/mm

$249.94
1 In Stock

Spring Rate: 0.44 kg/mm

$249.94
2 In Stock

Spring Rate: 0.46 kg/mm

$249.94
1 In Stock

Spring Rate: 0.48 kg/mm

$249.94
1 In Stock

Spring Rate: 0.50 kg/mm

$249.94
2 In Stock

Spring Rate: 0.52 kg/mm

$249.94
1 In Stock

Spring Rate: 0.54 kg/mm

$249.94
1 In Stock

DRC/ENZO TOOL FORK CAP SPINNER KYB/SHOWA BLUE

Co-developed product with Enzo Racing
(SKU: ED59-37-310)

$49.50
13 In Stock

48mm KYB SKF Mud Scraper

Removable Scraper
(SKU: KIT-MS48KM)

$55.00
1 In Stock

48mm KYB Fork Seal and Dust Wiper Set 2pc set , Hi performance seal

one oil seal and one dust seal, buy 2 sets for one bike
(SKU: KYB48Capset)

Dust Wiper Inside Diameter d (mm): 48.0

Oil Seal Inside Diameter d (mm): 48.0

Dust Wiper Height H (mm): 9.5

Oil Seal Height H (mm): 4.9

Dust Wiper Outside Ø D1 (mm): 58.2

Oil Seal Outside Ø D1 (mm): 58.7

$44.00
53 In Stock

K-Tech Shock Absorber Piston Bush (46x11.50x1.20) -KYB / OHLINS TTX FLOW

(SKU: PB-46115120)

$37.20
8 In Stock

SKF 48mm KYB Fork Seal & Wiper Set

Requires 2 kits for complete fork service.
(SKU: SKF48K)

Colour: Green

Seal Outer Ø D (mm): 58.42

Seal Height H (mm): 8.5

Seal Wiper Outside Ø D1 (mm): 58.70

Seal Wiper Height H1 (mm): 4.9

Fork Inner Tube Ø d (mm): 48.0

$59.95
56 In Stock

SKF 48mm KYB Fork Seal & Wiper Set - Heavy Duty

Requires 2 kits for complete fork service.
(SKU: SKF48KHD)

Colour: Green

Seal Outer Ø D (mm): 58.42

Seal Height H (mm): 8.5

Seal Wiper Outside Ø D1 (mm): 58.70

Seal Wiper Height H1 (mm): 4.9

Fork Inner Tube Ø d (mm): 48.0

$59.95
16 In Stock

InnTeck Inner Slide Fork Bush KAYABA 48mm can use KYB 110034800102

KAYABA 48mm 47x49x20
(SKU: SKTE48K)

Inside Diameter d (mm): 47.0

Fork Inner Tube Ø d (mm): 48.0

Height H (mm): 20.0

Outside Ø D (mm): 49.0

Wall Thickness (mm): 1.0

$16.50
7 In Stock

InnTeck Outer Guide Fork Bush KAYABA 48mm can use KYB 110044800202

KAYABA 48mm 48x52x15
(SKU: SKTI48K)

Inside Diameter d (mm): 48.0

Fork Inner Tube Ø d (mm): 48.0

Height H (mm): 15.0

Outside Ø D (mm): 52.0

Wall Thickness (mm): 2.0

$16.50
7 In Stock

KYB Genuine Spring seat ff steel for spring of free piston

OEM KYB Japan
(SKU: 110250000301)

$7.96
Special Order

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.

Subscribe to our Newsletter

Terms & Conditions

Privacy Policy

1. WHAT WE COLLECT

2. WHAT WE DO WITH THE INFORMATION WE GATHER

3. SECURITY

4. HOW WE USE COOKIES

5. CONTROLLING YOUR PERSONAL INFORMATION