eX-Change Pro Electronic Shock Absorbers - 15mm Lowered

Teknik eX-CHANGE PRO (15mm Low)

eX-CHANGE PRO (15mm Low)

15mm shorter than factory height. These eX-CHANGE PRO (15mm Low) dampers are a plug & play replacement for BMW ESA shock absorbers, offering a lower ride height with manual high and low speed compression tuning and a piggyback cartridge for improved offroad and road performance.

ESA shock replacement at 15mm lower ride height

  • Direct swap for the stock electronically controlled damper — reuses the stock spring and electronic preload adjuster
  • Manual high & low speed compression adjustment for precise damping control
  • Piggyback reservoir and cold-forged 6082 aluminium body for durability and serviceability
  • Stronger, more reliable motors for wider Dynamic ESA tuning and faster response
  • Fully rebuildable with multiple spring rates available to suit different rider weights

Recommended Pairings

Consider matching your shock upgrade with Suspension Tools for correct installation and setup. Also see our guides and media on fitment below.

When replacing ESA units consult the BMW ESA replacement options, read about safely removing and changing shock coil springs, and watch the ESA changeover video.

Shop eX-CHANGE PRO (15mm Low)

Browse the eX-CHANGE PRO range to find the correct 15mm low replacement shock for your BMW.

1 Product Found
Tractive eX-CHANGE PRO Shock BMW R 1250 GS

Tractive eX-CHANGE PRO Shock BMW R 1250 GS

Rear | Lowered -15mm | EPA OEM
(SKU: 46BM18-P4149-TR-01)
Position (Front or Rear):   Rear
Damping Adjustment Type:   Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster:   Electro-hydraulic OEM to be re-used
Seat Height Change (mm):   Lowered -15
Shock Length Eye to Eye (mm):   397.0
Spring Rate Standard:   150 N/mm
Type Code:   eX-CHANGE PRO
Stroke Metal to Metal (mm):   79.0
Fitted Spring:   150-205
 

eX-CHANGE PRO (15mm Low)

15mm shorter than factory height. These eX-CHANGE PRO (15mm Low) dampers are a plug & play replacement for BMW ESA shock absorbers, offering a lower ride height with manual high and low speed compression tuning and a piggyback cartridge for improved offroad and road performance.

ESA shock replacement at 15mm lower ride height

  • Direct swap for the stock electronically controlled damper — reuses the stock spring and electronic preload adjuster
  • Manual high & low speed compression adjustment for precise damping control
  • Piggyback reservoir and cold-forged 6082 aluminium body for durability and serviceability
  • Stronger, more reliable motors for wider Dynamic ESA tuning and faster response
  • Fully rebuildable with multiple spring rates available to suit different rider weights

Recommended Pairings

Consider matching your shock upgrade with Suspension Tools for correct installation and setup. Also see our guides and media on fitment below.

When replacing ESA units consult the BMW ESA replacement options, read about safely removing and changing shock coil springs, and watch the ESA changeover video.

Shop eX-CHANGE PRO (15mm Low)

Browse the eX-CHANGE PRO range to find the correct 15mm low replacement shock for your BMW.