Motorcycle fork spring KYB Showa WP Sachs setup weight motocross racing touring adventure

HiCalibre Fork Springs 33 x 365 Common Fitment Kawasaki KLR 650 41mm

Manufactured in the USA from the highest grade Chrome Silicone wire. All springs have their rate engraved or etched on the ends. Spring rates made in very low volumes do attract a higher price. Please take not when ordering. Delivery from the USA for backorders is always air freight with a 2-3 week turnaround. Special order springs will take 3-4 weeks.

Spring to suit KYB Showa WP Sachs Boge Marzocchi Soqi Ohlins and other brands of motorcycle shock absorbers. For detailed fitment information use our Make/Model/Year search at the top of your screen.

Cold coiled
Heat treated
Tempered
Shot peened
Pre Set
Ends ground to length

Sold as a pair from our Sydney warehouse with a lifetime warranty against sagging bending or breaking.

SKU	19-075
Brand	HiCalibre
Unit Of Measure	Pair
Type	PARENT

See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Spring Large OD (mm)	33.0
Spring Small OD (mm)	33.0
Spring Free Length (mm)	365

Related products

HiCalibre Fork Springs 30 x 550 Common Fitment Kawasaki KLR 650 1995-2007

999 In Stock

HiCalibre Fork Springs 30 x 550 Common Fitment Kaw

Proudly made in the USA(SKU: 19-058)

From $345.00

Fork Seal and Wiper Set - 41 x 53 x 7.5

10 In Stock

Fork Seal and Wiper Set - 41 x 53 x 7.5

41mm id x 53mm od x 7.5mm tall - KYB Conventional(SKU: 24-840-00)

$55.00

Teknik Shock Spring 59 x 225

999 In Stock

Teknik Shock Spring 59 x 225

Made in The Netherlands to ISO 9001(SKU: 59-225)

From $220.00

Eibach EMS Moto Front Fork Spring Kit. 43.95 x 43.95 x 448. KYB where 453mm is STD

999 In Stock

Eibach EMS Moto Front Fork Spring Kit. 43.95 x 43.

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 905)

From $249.94

More From This Category

Eibach EMS Moto Front Fork Spring Kit. WP Extreme 50mm KTM 125 250 300 400 620 LC4 *Discontinued*

999 In Stock

Eibach EMS Moto Front Fork Spring Kit. WP Extreme

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 980)

From $249.94

Eibach EMS Moto Front Fork Spring Kit. 31.10 x 318. Yamaha YZ65

999 In Stock

Eibach EMS Moto Front Fork Spring Kit. 31.10 x 318

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 909)

From $249.94

HiCalibre Fork Spring 43.5 x 743 - Single (Eibach 966) KX250F SFF1 Showa 47

999 In Stock

HiCalibre Fork Spring 43.5 x 743 - Single (Eibach

Proudly made in the USA(SKU: 19-172)

From $245.00

HiCalibre Fork Springs 27 x 460 Common Fitment: Kawasaki KX60

999 In Stock

HiCalibre Fork Springs 27 x 460 Common Fitment: Ka

Proudly made in the USA(SKU: 19-030)

From $345.00

Teknik Fork Springs 35 x 260

999 In Stock

Teknik Fork Springs 35 x 260

Made in The Netherlands to ISO 9001(SKU: 35-260)

From $220.00

HiCalibre Fork Springs 23 x 500 Common Fitment: Early HD Sportster

999 In Stock

HiCalibre Fork Springs 23 x 500 Common Fitment: Ea

Proudly made in the USA(SKU: 19-022)

From $345.00

HiCalibre Fork Springs 38.0 x 440 Common Fitemt Kawasaki KLX300S/R

999 In Stock

HiCalibre Fork Springs 38.0 x 440 Common Fitemt Ka

Proudly made in the USA(SKU: 19-134)

From $345.00

Eibach EMS Moto Front Fork Spring Kit. 30.00 x 367 KTM 65SX 2012-2016

999 In Stock

Eibach EMS Moto Front Fork Spring Kit. 30.00 x 367

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 929)

From $249.94

HiCalibre Fork Springs 33 x 370

999 In Stock

HiCalibre Fork Springs 33 x 370

Proudly made in the USA(SKU: 19-071)

From $245.00

HiCalibre Fork Springs 33/35 x 250 Street Bikes

999 In Stock

HiCalibre Fork Springs 33/35 x 250 Street Bikes

Proudly made in the USA(SKU: 19-084)

From $345.00

HiCalibre Fork Springs 27 x 585 Common Fitment: Honda CRF150F

999 In Stock

HiCalibre Fork Springs 27 x 585 Common Fitment: Ho

Proudly made in the USA(SKU: 19-040)

From $345.00

HiCalibre Fork Springs 43.5 x 555 Common Fitment KTM 1090R 1290R

999 In Stock

HiCalibre Fork Springs 43.5 x 555 Common Fitment K

Proudly made in the USA(SKU: 19-209)

From $345.00

Eibach EMS Moto Front Fork Springs 23.5 x 23.5 x 400. Vintage Road bikes

999 In Stock

Eibach EMS Moto Front Fork Springs 23.5 x 23.5 x 4

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 902)

From $249.94

Eibach EMS Moto Front Fork Spring Kit. 27/27/430mm

999 In Stock

Eibach EMS Moto Front Fork Spring Kit. 27/27/430mm

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 911)

From $249.94

Andreani Cartridge Kit Fork Spring CFZ 33 x 270mm

6 In Stock

Andreani Cartridge Kit Fork Spring CFZ 33 x 270mm

Sold individually(SKU: 02.M12)

From $129.00

HiCalibre Fork Springs 34.5 x 270 Street Bikes

999 In Stock

HiCalibre Fork Springs 34.5 x 270 Street Bikes

Proudly made in the USA(SKU: 19-092)

From $345.00

HiCalibre Fork Springs 31 x 428 (Eibach 913) Common Fitment YZ85 KX85

999 In Stock

HiCalibre Fork Springs 31 x 428 (Eibach 913) Commo

Proudly made in the USA(SKU: 19-065)

From $245.00

HiCalibre Fork Springs 38.8 x 505 Eibach 975 Common Fitment Honda XR650R

999 In Stock

HiCalibre Fork Springs 38.8 x 505 Eibach 975 Commo

Proudly made in the USA(SKU: 19-140)

From $245.00

HiCalibre Fork Springs 43.8 x 470 Common Fitment YZF WP Xplor 4CS

999 In Stock

HiCalibre Fork Springs 43.8 x 470 Common Fitment Y

Proudly made in the USA(SKU: 19-210)

From $245.00

HiCalibre Fork Springs 17.1 x 425 Common Fitment: Yamaha PW80

999 In Stock

HiCalibre Fork Springs 17.1 x 425 Common Fitment:

Proudly made in the USA(SKU: 19-007)

From $345.00

© 2026 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.