The T-Tech Suspension UK lower shock bearing is a service replacement part for the BMW 1250 GS/GSA lower shock mount. It’s intended to restore proper articulation at the mounting point when the original bearing shows wear or develops free play. Replace as part of a suspension refresh or when inspection indicates the bearing is no longer running smoothly.

Built For Real-World Suspension

The lower shock bearing supports controlled movement between the shock and the mounting hardware. When wear develops, you may notice looseness at the mount, notchy movement through stroke, or accelerated wear of adjacent components. If the bearing remains smooth, tight and correctly seated, it typically does not require replacement.

Compatibility

  • BMW 1250 GS
  • BMW 1250 GSA

Serviceability

Change the bearing when there is measurable play at the lower shock mount, visible damage, corrosion, contamination, or rough rotation/oscillation during inspection. If the mount hardware is being removed for other work, it’s also a practical time to assess the bearing condition before reassembly. Do not replace purely as a precaution if the bearing is clean, smooth and retains correct fit.

Setup & Workshop Notes

  • Confirm the bearing location is the lower shock mount before ordering and installation.
  • Inspect mating surfaces and mounting hardware for wear or damage that could mimic bearing play.
  • Install using appropriate workshop practices to avoid deforming the bearing during fitment.

Next Steps

If you’re chasing unwanted movement at the rear shock mount, inspect the bearing and surrounding hardware as a complete assembly. Replacing a worn lower shock bearing can be a targeted fix when play is isolated to the mount rather than the shock itself.

SKU 22-710-14
Barcode # 22-710-14
Brand T-Tech Suspension UK
Shipping Weight 0.0200kg
Shipping Size 0.050 x 0.050 x 0.050m
See our Shipping Information See our Frequently Asked Questions

Related products

More From This Category