The Tractive X-TREME Fork Cartridge kit for the Yamaha Tenere 700 Rally replaces the stock fork internals with a closed, pressurised sealed-cartridge design for more consistent damping. This kit is configured to lower the front end by 25mm, changing ride height and geometry compared with standard length. The closed, pressurised architecture helps reduce cavitation and maintain control across changing conditions.

Design & features

  • Sealed-cartridge fork conversion (closed and pressurised)
  • Designed specifically for the Yamaha Tenere 700 Rally platform
  • Lowered configuration: -25mm front ride height change

Tuning Controls

  • Rebound damping adjustment
  • Compression damping adjustment

Who is this for?

  • Riders wanting a closed, pressurised cartridge-style fork setup for more stable damping behaviour
  • Owners who want to reduce front ride height by 25mm for fit, balance, or chassis preference
  • Riders who value having both compression and rebound adjustability for tuning

Before You Install

  • Confirm the lowered (-25mm) front end change suits your intended geometry and setup
  • Professional installation is recommended for cartridge conversions
  • After fitting, plan to re-check overall chassis balance to match the new front ride height

Serviceability/Lifecycle

  • Closed, pressurised cartridge construction is intended to keep damping consistent over long and demanding use
  • Routine servicing intervals depend on use conditions and workload

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35YA25-D5347-TR
Model # 35YA25-D5347-TR
Barcode # 35YA25D5347TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Shock Length Eye to Eye (mm) 910
Length Change (mm) Lowered -25mm
Spring Rate Standard 5,6
Type Code X-TREME
Stroke Metal to Metal (mm) 200
Notes Hydraulic end-stop
Fitted Spring :5.6-390

More From This Category