This TracTive Suspension part for the BMW R 1250 GS Adventure uses a sealed, closed and pressurised cartridge-style design intended to deliver consistent damping by keeping the oil under pressure and reducing aeration. It is built around a self-contained hydraulic assembly rather than an open-bath layout. The unit is designed as a fitment-specific component for the R 1250 GS Adventure.

Design & features

  • Sealed cartridge architecture (closed and pressurised) to help maintain damping consistency across a wider range of conditions.
  • Compact, self-contained hydraulic build intended for straightforward integration as a model-specific part.

Tuning Controls

The provided product data does not specify which external adjustments (if any) are included on this TracTive component.

Base Setup (factory preset)

No factory preset or baseline settings are supplied in the provided product row.

Before You Install

  • Confirm exact model and fitment details for your BMW R 1250 GS Adventure before ordering.
  • Have installation performed by a qualified technician if you are not experienced with suspension component removal and refitment.

Serviceability/Lifecycle

Service intervals and rebuild details are not included in the provided product information. As with most pressurised, sealed suspension components, condition and performance depend on use, contamination control, and correct installation.

Need Help Choosing?

If you are trying to match this part to a specific use case or want to confirm whether it includes any damping or preload adjustments, use the full part identification from the product row when contacting Teknik Motorsport.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 73BM13-PXX29-TR-03
Model # 73BM13-PXX29-TR-03
Barcode # 73BM13PXX29TR03
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.050 x 0.400m
Unit Of Measure ea
Type EPA
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic

More From This Category

Tractive Part BMW R 1250 GS Special Order

Tractive Part BMW R 1250 GS

Rear | Standard Height | EPA(SKU: 73BM13-PXX29-TR-02)

$1,795.00

Custom build by TracTive Netherlands for every order. Usually 6-8 weeks depending on component availability
Tractive Part BMW R 1200 GS Adventure Special Order

Tractive Part BMW R 1200 GS Adventure

Rear | Standard Height | EPA(SKU: 73BM13-PXX29-TR-01)

$1,795.00

Custom build by TracTive Netherlands for every order. Usually 6-8 weeks depending on component availability
Tractive Part BMW R 1200 GS Special Order

Tractive Part BMW R 1200 GS

Rear | Standard Height | EPA(SKU: 73BM13-PXX29-TR)

$1,795.00

Custom build by TracTive Netherlands for every order. Usually 6-8 weeks depending on component availability