Eibach EMS Moto Front Fork Springs 25.00 x 335. Road bikes with 32-33mm forks
Eibach's MOTO fork springs provide tuning capability for maximum perfromance and durability on any terrain.
- Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
- Ultra-Lightweight for Reduced Unsprung Mass
- Each Spring Individually Tested
- Highest Linearity and Guaranteed Consistency
- Made In U.S.A.
Note: Fork springs are sold as pairs unless for Single Function Fork applications as per image.
Note: We do not guarantee fitment, height or warranties on unlisted applications.
Eibach Limited Lifetime Warranty
1. Eibach Limited Lifetime Warranty
All Eibach, Inc. ("Eibach") Suspension Springs, Anti-Roll-Kits, Pro-Spacers, Pro-Dampers and Pro-Truck Shocks (including Sport and Sport Leveling), Pro-Truck Coilover Systems, Pro-Alignment Kits, (collectively, "Products") are covered by a limited lifetime warranty, (the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser, who has proof of purchase and retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.
2. Exclusions from Warranty
This warranty does not apply to any products:
a. That have been improperly installed or have not been properly installed by a qualified, licensed auto mechanic experienced in the installation and removal of suspension products.
b. That have been improperly serviced, that have been misused, or that have been modified, altered or subjected to abuse, negligence, accident or collision.
c. Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits.
c. Installed on any vehicle that has been used for rallying, racing or racing-type activities or extreme off-road use.
d. Presented for warranty coverage by a person other than the purchaser.
e. Presented for warranty coverage after being used on a vehicle other than the one on which it was originally installed.
3. Reservation of Rights
Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.
4. Exclusion of Other Warranties
This Warranty is the entire and only Warranty for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description. The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty.
There are no warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose, which extend beyond the description on the face hereof. Any implied warranties are disclaimed to the fullest extent permitted by law and shall in no event exceed the purchase price of the product. These warranties do not cover consequential damages, loss of time or revenues, inconvenience, loss of use of the vehicle, damage to the vehicle or components of the vehicle, reimbursement for labor, any other type of consequential damages, or other incidental or indirect damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages; in such states the above limitations or exclusions may not apply. These Warranties give the Purchaser specific legal rights, and the Purchaser may have other rights that may vary from state to state.
5. Warranty Claim Procedure
To make a claim, the Purchaser should contact the Eibach dealer/ distributor from which the Products were originally purchased. The dealer/distributor should then contact Eibach to obtain a Return Goods Authorization (RGA) number to return the Products to Eibach.
Any and all returns must be accompanied by (1) an RGA number, (2) a sales receipt verifying the purchase of the Products, and (3) a statement containing the Purchaser's name, address, make and model of the vehicle, and a brief description of the claimed defect, including the circumstances under which the defect occurred.
Warranty related inquiries should be mailed to the following address:
Eibach Suspension Technology.
Unit 3/4 Prosperity Parade Warriewood NSW 2102
Eibach will not accept Product returns without the RGA number, receipt and statement described above. C.O.D. or collect shipments will be refused. Once the returns are received at Eibach, Eibach will evaluate the Products, verify the sales receipt, and investigate the statement.
The Purchaser is responsible for returning the Products to the Eibach dealer/distributor, including shipping costs as well as costs incurred for removing and installing the Products on the vehicle. Eibach does not warranty labor costs.
| SKU | 920 |
| Brand | Eibach Suspension Technology |
| Shipping Weight | 1.5000kg |
| Shipping Size | 0.140 x 0.060 x 0.580m |
If your Motorcycle is listed below, this product will suit:
- HONDA CB360G 1973
- HONDA CB360G 1974
- HONDA CB360G 1975
- HONDA CB360G 1976
- HONDA CB360G 1977
- HONDA CB400F 1975
- HONDA CB400F 1976
- HONDA CB400F 1977
- HONDA CB400F 1978
- HONDA CB400F 1979
- HONDA CB400T 1978
- HONDA CB400T 1979
- HONDA CB400T 1980
- HONDA CB400T 1981
- HONDA CB400T 1982
- KAWASAKI H1 500 Mach III (500 Triple) 1969
- KAWASAKI H1 500 Mach III (500 Triple) 1970
- KAWASAKI H1 500 Mach III (500 Triple) 1971
- KAWASAKI H1 500 Mach III (500 Triple) 1972
- YAMAHA XV250 Virago 1989
- YAMAHA XV250 Virago 1990
- YAMAHA XV250 Virago 1991
- YAMAHA XV250 Virago 1992
- YAMAHA XV250 Virago 1993
- YAMAHA XV250 Virago 1994
- YAMAHA XV250 Virago 1995
- YAMAHA XV250 Virago 1996
- YAMAHA XV250 Virago 1997
- YAMAHA XV250 Virago 1998
- YAMAHA XV250 Virago 1999
- YAMAHA XV250 Virago 2000
- YAMAHA XV250 Virago 2001
- YAMAHA XV250 Virago 2002
- YAMAHA XV250 Virago 2003
- YAMAHA XV250 Virago 2004
- YAMAHA XV250 Virago 2005
- YAMAHA XV250 Virago 2006
- YAMAHA XV250 Virago 2007
- YAMAHA XV250 Virago 2008
- YAMAHA XV250 Virago 2009
- YAMAHA XV250 Virago 2010
- YAMAHA XV250 Virago 2011
- YAMAHA XV250 Virago 2012
- YAMAHA XV250 Virago 2013
- YAMAHA XV250 Virago 2014
- YAMAHA XV250 Virago 2015
- YAMAHA XV250 Virago 2016
- YAMAHA XV250 Virago 2017
- YAMAHA XV250 Virago 2018
- YAMAHA XV250 Virago 2019
- YAMAHA XV250 Virago 2020
- YAMAHA XV250 Virago 2021
- YAMAHA XV250 Virago 2022
- YAMAHA XV250 Virago 2023
- YAMAHA XV250 Virago 2024
- YAMAHA XV250 Virago 2025
- YAMAHA XV250 Virago 2026
- YAMAHA YZF-R125 2009
- YAMAHA YZF-R125 2010
- YAMAHA YZF-R125 2011
- YAMAHA YZF-R125 2012
- YAMAHA YZF-R125 2013
- YAMAHA YZF-R125 2014
- YAMAHA YZF-R125 2015
- YAMAHA YZF-R125 2016
- YAMAHA YZF-R125 2017
| Spring Large OD (mm) | 25.0 |
| Spring Small OD (mm) | 25.0 |
| Spring Free Length (mm) | 335 |
Related products
Eibach EMS Moto Front Fork Spring Kit. 31.10 x 318
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 909)
From
$249.94
KoubaLink Lowering Link Kawasaki KX 80/85/100 and
Enhanced Control with Expert Engineering(SKU: KOUBALINK-KX100)
From
$176.00
HiCalibre Shock Spring 55 X 250 Common Fitment Yam
Proudly made in the USA(SKU: 20-058)
From
$245.00
More From This Category
Eibach EMS Moto Front Fork Spring Kit. 43.2 x 455
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 967)
From
$249.94
Eibach EMS Moto Front Fork Spring Kit. 44.0 x 455
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 968)
From
$249.94
HiCalibre Fork Springs 31.7 x 340 Street Bikes
Proudly made in the USA(SKU: 19-068)
From
$295.00
HiCalibre Fork Springs 30 x 338 Common Fitment: KT
Proudly made in the USA(SKU: 19-052)
From
$245.00
HiCalibre Fork Springs 40.2 x 462 Common Fitment S
Proudly made in the USA(SKU: 19-145)
From
$245.00
Eibach EMS Moto Front Fork Spring Kit. 38.1 x 38.1
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 907)
From
$249.94
Eibach EMS Moto Front Fork Spring Kit. 30.00 x 367
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 929)
From
$249.94
HiCalibre Fork Springs 29.5 x 370. Common Fitment
Proudly made in the USA(SKU: 19-054)
From
$245.00
Ohlins 08423-10 Fork Springs for Ohlins Products N
Ohlins Suspension - Engineered for Performance(SKU: 08423-10)
$254.95
Eibach EMS Moto Front Fork Spring Kit. 28.2 x 425
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 912)
From
$249.94
HiCalibre Fork Springs 40.5 x 395 Common Fitment 4
Proudly made in the USA(SKU: 19-144)
From
$295.00
Eibach EMS Moto Front Fork Spring Kit. 27.00 x 430
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 924)
From
$249.94
Teknik Fork Springs 45 x 495 Honda CRF 2025-
Made in The Netherlands to ISO 9001(SKU: 45-495)
From
$235.00
HiCalibre Fork Springs 34.5 x 270 Street Bikes
Proudly made in the USA(SKU: 19-092)
From
$295.00
HiCalibre Fork Springs 38 x 425 Common Fitment KTM
Proudly made in the USA(SKU: 19-125)
From
$245.00
HiCalibre Fork Springs 38.0 x 440 Common Fitemt Ka
Proudly made in the USA(SKU: 19-134)
From
$295.00
HiCalibre Fork Springs 43 x 485 (Eibach 969) WP CC
Proudly made in the USA(SKU: 19-180)
From
$245.00
Eibach EMS Moto Front Fork Springs 23.5 x 23.5 x 4
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 902)
From
$249.94






