DRC/ENZO TOOL FORK CAP SPINNER WP BLACK

- ENZO×DRC collaboration tool.
- Both hands to loosen the top cap.
- The leverage power helps it rotate.
- Rod stopper is convenient for disassembly.
- Made of aluminum. - Length is about 300 mm.

SKU	ED59-37-320
Brand	DRC Zeta Hardware
Shipping Weight	0.1000kg
Shipping Size	0.050 x 0.050 x 0.050m
Unit Of Measure	ea
Assembled Width	0.050m

See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Related products

HiCalibre Shock Spring 62.5 x 250 (Eibach 882) WP Linkage KTM SX SXF Husqvarna TC FC

999 In Stock

HiCalibre Shock Spring 62.5 x 250 (Eibach 882) WP

Proudly made in the USA(SKU: 20-096)

From $245.00

KYB / WP Fork Cap Spanner

8 In Stock

KYB / WP Fork Cap Spanner

2 Piece set for KYB inner/outer and WP(SKU: 93-003-00)

$77.00

Fork Seal Driver - 48mm

12 In Stock

Fork Seal Driver - 48mm

See Part # 93-009-00 for complete set(SKU: 93-009-50)

$87.95

18 x 16mm Shock Seal Head Bullet. Suits Pds Shock With Long Shaft.

1 In Stock

18 x 16mm Shock Seal Head Bullet. Suits Pds Shock

Motorcycle Suspension Tools(SKU: 93-027-00)

$19.95

24mm WP Pds Shock Shaft Jam Nut Tool

29 In Stock

24mm WP Pds Shock Shaft Jam Nut Tool

Motorcycle Suspension Tools(SKU: 93-030-00)

$66.00

WP Reservoir Removal Tool - 2 Pin Type

5 In Stock

WP Reservoir Removal Tool - 2 Pin Type

Fits many WP Shocks from 1984 on(SKU: 93-046-00)

$55.00

Teknik Shock Spring 59 x 225

999 In Stock

Teknik Shock Spring 59 x 225

Made in The Netherlands to ISO 9001(SKU: 59-225)

From $235.00

Fork Compression Valve Removal Tool - KYB

24 In Stock

Fork Compression Valve Removal Tool - KYB

Fork Compression Valve Removal Tool - KYB(SKU: 93-003-04)

$22.00

Eibach EMS Moto Rear Shock Spring Kit 62.8 x 247 (62-245 20-096) WP Linkage KTM SX SXF Husqvarna TC FC

999 In Stock

Eibach EMS Moto Rear Shock Spring Kit 62.8 x 247

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 882)

From $249.94

WP Shock Clevis Jam Nut Socket

2 In Stock

WP Shock Clevis Jam Nut Socket

Reaches the shaft jam nut in WP(SKU: 08-0730)

$79.75

Motion Pro WP Shock Reservoir 2 Pin Socket

2 In Stock

Motion Pro WP Shock Reservoir 2 Pin Socket

For all WP Shocks with 2 pin reservoir(SKU: 08-080612)

$60.50

Eibach EMS Moto Rear Shock Spring Kit (SRSP 6023) KTM WP EXC Xplor Progressive

999 In Stock

Eibach EMS Moto Rear Shock Spring Kit (SRSP 6023)

Made in the USA (SKU: 874)

From $249.94

Krooztune XPLOR Clamp Tool 6 and 12mm

8 In Stock

Krooztune XPLOR Clamp Tool 6 and 12mm

Proudly made in Australia(SKU: KT-XPLORFF-TL)

$31.96

More From This Category

Non Marking Showa A-Kit Inner Cartridge Tool

1 In Stock

Non Marking Showa A-Kit Inner Cartridge Tool

3D Printed From ASA(SKU: 93-024-01)

$34.99

Lainer Wrench for fork SACHS 48 CC

2 In Stock

Lainer Wrench for fork SACHS 48 CC

(SKU: WRH_SHS48)

$89.99

Inner Fork Cap Undo Socket Tool - WP Cone Valve Pro Componets

4 In Stock

Inner Fork Cap Undo Socket Tool - WP Cone Valve Pr

(SKU: 93-003-08)

$65.95

Fork Preload Adjuster Socket - 14mm

28 In Stock

Fork Preload Adjuster Socket - 14mm

Honda CBR600 and Kawasaki ZX-12R(SKU: 93-019-03)

$27.50

Inner Fork Cap Undo Socket Tool - KYB Twin Chamber

11 In Stock

Inner Fork Cap Undo Socket Tool - KYB Twin Chamber

Motorcycle Suspension Tools(SKU: 93-003-02)

$20.00

DRC ENZO | Fork Base Valve Wrench Jig | WP AER | Silver

7 In Stock

DRC ENZO | Fork Base Valve Wrench Jig | WP AER | S

Developed by Enzo Racing(SKU: ED59-37-205)

$66.00

DRC FORK CAP WRENCH PRO | WP 4800 CONE VALVE | 35mm ORANGE

3 In Stock

DRC FORK CAP WRENCH PRO | WP 4800 CONE VALVE | 35m

(SKU: D59-37-173)

$32.00

KYB Suspension Tools Top cap wrench 49mm blue

2 In Stock

KYB Suspension Tools Top cap wrench 49mm blue

Original KYB Motorcycle Suspension Tool(SKU: 000.0462)

$86.02

KYB / WP Fork Cap Spanner

8 In Stock

KYB / WP Fork Cap Spanner

2 Piece set for KYB inner/outer and WP(SKU: 93-003-00)

$77.00

Krooztune WP 40mm Fork Cap Spanner WP 35 USD to 2020

5 In Stock

Krooztune WP 40mm Fork Cap Spanner WP 35 USD to 20

Proudly made in Australia(SKU: KT-WP40CS)

$25.00

Non-Marking Fork Cap Wrench - 30mm

23 In Stock

Non-Marking Fork Cap Wrench - 30mm

Non-Marking Fork Cap Wrench - 30mm(SKU: 93-000-03)

$22.00

Fork Jam Nut Tool Suits Ohlins FGK 17mm

16 In Stock

Fork Jam Nut Tool Suits Ohlins FGK 17mm

Suits Ohlins FGK Fork Cart. Tool(SKU: 93-014-00)

$21.45

Non-Marking Fork Cap Wrench - 17mm

20 In Stock

Non-Marking Fork Cap Wrench - 17mm

Non-Marking Fork Cap Wrench - 17mm(SKU: 93-000-08)

$22.00

DRC Fork Compression Valve Removal Tool | Showa Af

2 In Stock

DRC Fork Compression Valve Removal Tool | Showa Af

(SKU: D59-24-020)

$37.95

WP 4Cs Fork Cap Socket (93-047-02)

3 In Stock

WP 4Cs Fork Cap Socket (93-047-02)

Motorcycle Suspension Tools(SKU: 08-080573)

$69.95

DRC Fork Compression Valve Removal Tool | KYB

4 In Stock

DRC Fork Compression Valve Removal Tool | KYB

(SKU: D59-24-016)

$37.95

Lainer Multifunctional wrench WP43 AER Showa 49 KYB Shock

2 In Stock

Lainer Multifunctional wrench WP43 AER Showa 49 KY

(SKU: 18LB241)

$103.40

KYB WP Twin Chamber And AER Fork Cap Tool

7 In Stock

KYB WP Twin Chamber And AER Fork Cap Tool

(SKU: 93-019-01)

$41.25

KYB Inner Fork Cap Tool

1 In Stock

KYB Inner Fork Cap Tool

(SKU: 93-023-00)

$41.25

Lainer Wrench for Compression Kit WP XPlor Lainer

2 In Stock

Lainer Wrench for Compression Kit WP XPlor Lainer

(SKU: WPXPLORE_WRENCH_PART2)

$77.00

© 2026 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.