The Lainer Suspension shock shaft tool kit is designed to support machining and service work on Showa and KYB shock absorbers using M12 and M16 threads. Supplied as a two-tool kit, it includes a centring device intended to help mill excess material from the stock bolt. This is a workshop-focused solution for technicians working on standard shocks where consistent preparation is required.

Inside the System

This kit is intended for use when preparing or modifying shock shaft/bolt components during suspension servicing. The centring device is used to align the tool for controlled removal of excess material, supporting repeatable results without manual rasping or the use of a lathe for the described task.

Compatibility

  • Showa and KYB shock absorbers
  • M12 and M16 threads

Setup & Workshop Notes

  • Use when excess material needs to be milled from the stock bolt as part of shock servicing or preparation work.
  • Not required for routine rebuilds where the stock bolt and associated interfaces do not need material removal or modification.
  • As a machining tool, it should be used by competent suspension technicians with appropriate workshop practices.

Key Features

  • Two-tool kit
  • Supplied with a centring device
  • Designed for M12 and M16 applications on Showa and KYB shocks
  • Made in Italy
SKU MILLING_KIT_M12-M16
Brand Lainer Suspension
Shipping Weight 0.0050kg
Shipping Size 0.005 x 0.050 x 0.050m
See our Shipping Information See our Frequently Asked Questions

Related products

More From This Category