The Lainer Suspension rebound holder is a workshop tool designed to hold the rebound assembly during servicing of KYB 48 forks up to 2017, including TM Moto applications. It is used during disassembly and reassembly to keep internal components controlled and supported. This helps reduce the chance of damage when working on the rebound assembly.

Inside the System

In KYB 48 fork servicing, the rebound assembly can require holding to prevent unwanted rotation or movement while other components are loosened or tightened. A rebound holder tool provides positive engagement so the rebound assembly can be managed safely as the fork is worked on.

Compatibility

  • KYB 48 forks up to 2017
  • TM Moto applications (as noted)

Setup & Workshop Notes

  • Use when the service procedure calls for holding the rebound assembly during disassembly or reassembly.
  • Not required for general external adjustments or routine inspection steps where the rebound assembly does not need to be restrained.
  • If engagement feels incorrect, confirm the fork model and year range before proceeding.

Serviceability

This is a service tool rather than a wear component. Replace it if it shows damage, deformation, or slipping/poor engagement that could risk marking internal parts during use. It should not be replaced simply due to routine fork service intervals.

Next Steps

Confirm your fork type (KYB 48) and model year (up to 2017) before use, then follow your standard fork service procedure for rebound assembly handling.

SKU 24-015-36
Brand Lainer Suspension
Shipping Weight 0.0050kg
Shipping Size 0.005 x 0.050 x 0.050m
See our Shipping Information See our Frequently Asked Questions

More From This Category