The Lainer Suspension check valve is a fork damping component for WP fork systems, using an M6 x 0.50 thread. It is used to control oil flow within the damping circuit as part of routine servicing or a rebuild. Supplied as a single piece.

Inside the System

A check valve is a one-way flow control part within the fork’s damping assembly. When it is worn, contaminated or damaged, oil flow control can become inconsistent and may affect damping behaviour.

Serviceability

  • Replace when: the valve is damaged, shows wear, is sticking, or you are renewing critical internal damping components during a fork rebuild.
  • Do not replace when: the existing valve is clean, undamaged and functioning correctly during an inspection—unnecessary replacement can introduce fitment issues if the thread or seating surfaces are not identical.

Compatibility

  • Fork system: WP forks
  • Thread size: M6 x 0.50 mm

Setup & Workshop Notes

  • Sold individually; two pieces are required for a pair.
  • Confirm thread and application before installation to avoid damage to the fork body or internal components.

Next Steps

If you are troubleshooting damping inconsistencies, inspect the check valve alongside the rest of the damping stack and oil condition during service to identify the root cause before replacing parts.

SKU CHECKVF_6X0.50_WP
Barcode # CHECKVF6X050WP
Brand Lainer Suspension
Shipping Weight 0.2000kg
Shipping Size 0.050 x 0.050 x 0.050m
See our Shipping Information See our Frequently Asked Questions
Thread Size M6 x 0.5

More From This Category