Motorcycle Fork Adjuster Parts
Many motorbikes - especially offroad or sports bikes - have adjustable damping suspension. It means you can tune your settings for racing or for comfort by getting the front end to react well to that particular terrain. If you're pushing through sand, you aren't getting the same forces as bouncing off tree roots and rocks, and you need to adjust your fork legs to match.
Compression clickers are traditionally at the top on the fork cap, Rebound clickers are traditionally at the base, inside the bottom axle lug.
Many newer bikes however feature "Split Function Forks" - where comp damping is handled by only one leg and reb damping by the other - meaning both adjusters are up the top on the caps. This is especially true for air forks and it's a nice change not having to crouch down awkwardly in the mud spinning tools!
These adjuster internals such as tapered needles, crush washers, small coil springs, grip knobs, rubber o-ring seals and outer case bolts help you rebuild your existing adjusters to save money or we also sell complete assemblies to help you save time.
3 In Stock
1 In Stock
18 In Stock
3 In Stock
8 In Stock
Showa Complete Center Bolt - M22x1.0 - 14mm thread length - 4 clicks per turn
Showa Genuine Parts(SKU: FB2600001)
8 In Stock
Showa Complete Center Bolt - M22x1.0 - 12mm thread length - 4 clicks per turn
Showa Genuine Parts(SKU: FB2600003)
2 In Stock
Showa Complete Center Bolt - M24x1.0 - 14mm thread length - 4 clicks per turn
Showa Genuine Parts(SKU: FB2600004)
5 In Stock
Showa Complete Center Bolt - M24x1.0 - 14.5mm thread length - 4 clicks per turn
Showa Genuine Parts(SKU: FB2600005)
5 In Stock
Showa Complete Center Bolt - M24x1.0 - 14mm thread length - 8 clicks per turn
Showa Genuine Parts(SKU: FB2600006)
7 In Stock
Showa Complete Center Bolt - M22x1.0 - 12mm thread length - 4 clicks per turn
Showa Genuine Parts(SKU: FB2600007)
8 In Stock
Showa Complete Center Bolt - M22x1.0 - 12mm thread length - 4 clicks per turn
Showa Genuine Parts(SKU: FB2600008)
2 In Stock
Special Order
Special Order
Many motorbikes - especially offroad or sports bikes - have adjustable damping suspension. It means you can tune your settings for racing or for comfort by getting the front end to react well to that particular terrain. If you're pushing through sand, you aren't getting the same forces as bouncing off tree roots and rocks, and you need to adjust your fork legs to match.
Compression clickers are traditionally at the top on the fork cap, Rebound clickers are traditionally at the base, inside the bottom axle lug.
Many newer bikes however feature "Split Function Forks" - where comp damping is handled by only one leg and reb damping by the other - meaning both adjusters are up the top on the caps. This is especially true for air forks and it's a nice change not having to crouch down awkwardly in the mud spinning tools!
These adjuster internals such as tapered needles, crush washers, small coil springs, grip knobs, rubber o-ring seals and outer case bolts help you rebuild your existing adjusters to save money or we also sell complete assemblies to help you save time.