Motorcycle Fork Cartridge Oil Lock & Spring Guide Parts

Oil Lock / Spring Guide Parts

Motorbike front forks are more than the two outer tubes — an internal cartridge does the real work. Our closed vs open chamber article explains this in detail. Sliding in the middle of that cartridge, with a reb adjuster assembly on the bottom & damping piston parts up top, is a fork cartridge rod that must be securely locked and leak-free. These o-ringed lower tube oil lock cases keep lubricants sealed, with stopper lock nuts & snap rings fastening everything together. Plastic fork spring guides keep the coils centred and stop scraping. The clicker inside the fork leg presses on the inner pushrod, adjusting the oil flow through the piston & shim stack; learn how to use them in our damping adjusters article.

Sealing, retention and spring centring for cartridge forks

• Prevent oil leaks with o-ringed lower tube oil lock cases
• Secure fork cartridge rods with stopper lock nuts & snap rings
• Keep coil springs centred using plastic spring guides
• Maintain proper clicker-to-piston operation for consistent damping

Recommended Pairings

Consider matching oil locks and guides with suspension tools for installation and service: Suspension Tools. For performance tuners, we also offer performance revalving kits and a wide range of valving shims.

Shop Oil Lock / Spring Guide Parts

Browse our selection of oil locks, spring guides, snap rings and jam nuts to service and upgrade your fork cartridges.