Suspension Ring Shim Collection - Sold in Packs of 10

Ring Shims

All rebuildable suspensions need shims & washers, and Teknik stocks the largest collection — more than 2 million in stock. Our range includes complete bulk kits, ring shims, check shims, cup washers and valve stop washers. If you need to swap damping shims please see our Shim Factor Calculator — one 0.30mm shim is NOT the same as two 0.15mm shims.

Role of ring shims in specialist valving

  • Ring shims have a thin outer edge and are used for reinforcing and spacing in specialist shim stacks.
  • Essential wear parts for both front forks and rear shocks; replace during every rebuild.
  • Pair with locknuts, teflon-lined shaft collars, refill springs and o-rings for correct assembly — see fork and shock bushings below.
  • Available in bulk kits for workshops and DIY suspension tuners.

Recommended Pairings

Consider matching ring shims with fork locknuts & bushes, shock locknuts & bushes and suspension tools. For related technical reading see lock nuts and fasteners or our suspension fluid weights table. Also view Suspension Tools.

Shop Ring Shims

Browse our ring shim selection to find the correct sizes and kits for your fork or shock rebuilds.

21 Products Found
Teknik Motorsport

Ring Shim - 32 x 35 x .25

32mm id x 35mm od x 0.25mm Thickness
(SKU: 32.35.25RingShim)
Inside Diameter d (mm):   32.0
Thickness (mm):   0.25
Outside Ø D (mm):   35.0
$0.83
Special Order