Motorcycle fork spring KYB Showa WP Sachs setup weight motocross racing touring adventure

HiCalibre Fork Springs 38.6 x 468 Common Fitment Yamaha Tenere 700 World Raid

Manufactured in the USA from the highest grade Chrome Silicone wire. All springs have their rate engraved or etched on the ends. Spring rates made in very low volumes do attract a higher price. Please take not when ordering. Delivery from the USA for backorders is always air freight with a 2-3 week turnaround. Special order springs will take 3-4 weeks.

Spring to suit KYB Showa WP Sachs Boge Marzocchi Soqi Ohlins and other brands of motorcycle shock absorbers. For detailed fitment information use our Make/Model/Year search at the top of your screen.

Cold coiled
Heat treated
Tempered
Shot peened
Pre Set
Ends ground to length

Sold Individually from our Sydney warehouse with a lifetime warranty against sagging bending or breaking.

SKU	19-108
Brand	HiCalibre
Unit Of Measure	Pair
Type	PARENT

If your Motorcycle is listed below, this product will suit:

Spring Large OD (mm)	38.6
Spring Small OD (mm)	38.6
Spring Free Length (mm)	468

Related products

Teknik Fork Springs 43.8 x 470 (Eibach 971)

104 In Stock

Teknik Fork Springs 43.8 x 470 (Eibach 971)

Made in The Netherlands to ISO 9001(SKU: 43.8-470)

RRP $235.00
From $220.00

Krooztune HUSQVARNA TC/TE/TXC/WR/SMR Lowering Linkage 08-13

1 In Stock

Krooztune HUSQVARNA TC/TE/TXC/WR/SMR Lowering Link

Proudly made in Australia(SKU: KT-HUSQLL40)

$219.95

KYB Suspension Tools Pressure gauge 0-15 bar

4 In Stock

KYB Suspension Tools Pressure gauge 0-15 bar

Original KYB Motorcycle Suspension Tool(SKU: 150290000101)

$348.38

More From This Category

Eibach EMS Moto Front Fork Spring Single. 43.75 x 660 SFF TAC Showa Air to Spring (ATS) Conversion (HiCalibre 19-173)

6 In Stock

Eibach EMS Moto Front Fork Spring Single. 43.75 x

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 964)

From $249.94

HiCalibre Fork Springs 38 x 470 KLX 250 300 1993-2008

17 In Stock

HiCalibre Fork Springs 38 x 470 KLX 250 300 1993-2

Proudly made in the USA(SKU: 19-114)

From $295.00

Eibach EMS Moto Front Fork Spring Kit. 43.95 x 43.95 x 448. KYB where 453mm is STD

4 In Stock

Eibach EMS Moto Front Fork Spring Kit. 43.95 x 43.

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 905)

From $249.94

HiCalibre Fork Springs 39 x 462 Common Fitment KLX300 1994-2008

3 In Stock

HiCalibre Fork Springs 39 x 462 Common Fitment KLX

Proudly made in the USA(SKU: 19-135)

From $245.00

Eibach EMS Moto Front Fork Spring Kit. WP Extreme 50mm KTM 125 250 300 400 620 LC4 *Discontinued*

1 In Stock

Eibach EMS Moto Front Fork Spring Kit. WP Extreme

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 980)

From $249.94

HiCalibre Fork Springs 38.0 x 440 Common Fitemt Kawasaki KLX300S/R

9 In Stock

HiCalibre Fork Springs 38.0 x 440 Common Fitemt Ka

Proudly made in the USA(SKU: 19-134)

From $295.00

HiCalibre Fork Springs 29 x 614 Common Fitment: Honda XR200R Yamaha TT-R 230

13 In Stock

HiCalibre Fork Springs 29 x 614 Common Fitment: Ho

Proudly made in the USA(SKU: 19-050)

From $245.00

HiCalibre Fork Springs 38/36 x 250 Street Bikes

4 In Stock

HiCalibre Fork Springs 38/36 x 250 Street Bikes

Proudly made in the USA(SKU: 19-122)

From $295.00

Eibach EMS Moto Front Fork Spring Kit. 43.4 x 482 WP 48 Closed Chamber KTM SX SXF 2008-2014

10 In Stock

Eibach EMS Moto Front Fork Spring Kit. 43.4 x 482

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 927)

From $249.94

HiCalibre Fork Springs 36 x 475 Common Fitment Yahama WR200 41mm USD

10 In Stock

HiCalibre Fork Springs 36 x 475 Common Fitment Yah

Proudly made in the USA(SKU: 19-100)

From $295.00

HiCalibre Fork Springs 34.7 x 340 Street Bikes

2 In Stock

HiCalibre Fork Springs 34.7 x 340 Street Bikes

Proudly made in the USA(SKU: 19-077)

From $295.00

HiCalibre Fork Springs 41.2 x 485 Common Fitment Honda CR125 2001-2007

2 In Stock

HiCalibre Fork Springs 41.2 x 485 Common Fitment H

Proudly made in the USA(SKU: 19-160)

From $245.00

HiCalibre Fork Springs 43.2 x 457 KTM 125 250 2007 950 990

1 In Stock

HiCalibre Fork Springs 43.2 x 457 KTM 125 250 2007

Proudly made in the USA(SKU: 19-162)

From $245.00

HiCalibre Fork Springs 44.8 x 500 Common Fitment 49 SHOWA CRF 2025-

13 In Stock

HiCalibre Fork Springs 44.8 x 500 Common Fitment 4

Proudly made in the USA(SKU: 19-222)

From $245.00

Eibach EMS Moto Front Fork Spring Kit. 31.10 x 318. Yamaha YZ65

1 In Stock

Eibach EMS Moto Front Fork Spring Kit. 31.10 x 318

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 909)

From $249.94

Teknik Fork Spring 43.5 x 660 - Single Function fork SFF Showa WP AER Conversion

99 In Stock

Teknik Fork Spring 43.5 x 660 - Single Function fo

Made in The Netherlands to ISO 9001(SKU: 43.5-660)

From $165.00

Eibach EMS Moto Front Fork Spring Kit. 43.2 x 455 Sachs Beta Sherco KTM 48 USD SX SXF 2007

1 In Stock

Eibach EMS Moto Front Fork Spring Kit. 43.2 x 455

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 967)

From $249.94

HiCalibre Fork Springs 43 x 485 (Eibach 969) WP CC 6500 Cone Valve KTM 640 950

10 In Stock

HiCalibre Fork Springs 43 x 485 (Eibach 969) WP CC

Proudly made in the USA(SKU: 19-180)

From $245.00

HiCalibre Fork Springs 36 x 505 Common Fitment CR KX RM CR 1980's 43mm fork

19 In Stock

HiCalibre Fork Springs 36 x 505 Common Fitment CR

Proudly made in the USA(SKU: 19-105)

From $295.00

Eibach EMS Moto Front Fork Spring Kit. 30.00 x 367 KTM 65SX 2012-2016

9 In Stock

Eibach EMS Moto Front Fork Spring Kit. 30.00 x 367

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 929)

From $249.94

© 2025 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.