The Tractive X-TREME Fork Cartridge kit is a closed, pressurised cartridge upgrade designed for the Yamaha Tenere 700 Rally. It replaces the internal damping system in the fork with a sealed cartridge architecture that maintains consistent oil control and reduces aeration under demanding use. This kit is standard height, so it does not change the bike’s ride height.

Design & features

  • Closed, pressurised cartridge design to help maintain damping consistency by keeping the damping circuit sealed and reducing cavitation/aeration.
  • Cartridge-based fork internals intended to improve control and predictability across mixed terrain use.

Tuning Controls

  • Dual-adjustable damping: rebound adjustment and compression adjustment.

Base Setup (factory preset)

Supplied with a factory baseline tune intended as a starting point for setup. Final settings should be matched to rider weight, load and riding conditions.

Before You Install

  • Confirm application for Yamaha Tenere 700 Rally and that the kit is standard height for your intended setup.
  • Professional installation is recommended, as fork disassembly and correct oil setup are required.

Serviceability/Lifecycle

As a sealed, pressurised cartridge system, the damping unit is designed to be serviceable to maintain performance over time. Service intervals depend on riding conditions and contamination exposure.

Need Help Choosing?

If you’re deciding between configurations, focus on whether you want dual damping adjustment and a closed, pressurised cartridge architecture, and confirm it matches your intended use and setup goals.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35YA25-D5346-TR
Model # 35YA25-D5346-TR
Barcode # 35YA25D5346TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
Format Front
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Shock Length Eye to Eye (mm) 935
Length Change (mm) Standard Height
Spring Rate Standard 5.6 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 225
Notes Hydraulic end-stop
Fitted Spring 5.6-415

Related products

More From This Category