The Tractive X-TREME Fork Cartridge kit for the BMW F 900 GS Adventure replaces the fork internals with a sealed, closed and pressurised cartridge system designed for consistent damping control. The closed-cartridge architecture helps maintain damping performance during sustained use by keeping the damping circuit stable and reducing aeration. No height change information is provided for this kit.

Design & features

This kit is built around a closed-cartridge layout, with sealed and pressurised internals to support consistent oil control. It is intended for riders who want a more controlled and predictable front end across changing surfaces and conditions.

Tuning Controls

This cartridge kit provides dual damping adjustment, allowing you to tune both compression and rebound to suit terrain, tyres, and load. Mechanical preload adjustment is also included to help set sag for rider weight, luggage, or a passenger.

Base Setup (factory preset)

Factory baseline settings are intended as a starting point, with further tuning done incrementally based on feel and conditions. Fork oil is included to support installation and initial setup.

Who is this for?

  • BMW F 900 GS Adventure riders who want more consistent damping control across mixed riding conditions
  • Adventure and off-road focused use where stable front-end behaviour is a priority
  • Riders carrying varying loads who need preload and damping tuning range

Serviceability/Lifecycle

The cartridge kit is fully serviceable, supporting routine maintenance and rebuilds to keep performance consistent over the long term.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35BM24-D5353-TR
Model # 35BM24-D5353-TR
Barcode # 35BM24D5353TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 880.0
Spring Rate Standard 5.6 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 220
Notes Hydraulic end-stop
Fitted Spring 5.6-415

More From This Category