Eibach EMS Moto Front Fork Spring Kit. 43.2 x 508 DR-Z400 WP 48 USD KTM 125 250 300 400 450 520

Eibach's MOTO fork springs provide tuning capability for maximum perfromance and durability on any terrain.

  • Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
  • Ultra-Lightweight for Reduced Unsprung Mass
  • Each Spring Individually Tested
  • Highest Linearity and Guaranteed Consistency
  • Made In U.S.A.

Note: Fork springs are sold as pairs unless for Single Function Fork applications as per image.

Note: We do not guarantee fitment, height or warranties on unlisted applications.

Eibach Limited Lifetime Warranty

1. Eibach Limited Lifetime Warranty

All Eibach, Inc. ("Eibach") Suspension Springs, Anti-Roll-Kits, Pro-Spacers, Pro-Dampers and Pro-Truck Shocks (including Sport and Sport Leveling), Pro-Truck Coilover Systems, Pro-Alignment Kits, (collectively, "Products") are covered by a limited lifetime warranty, (the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser, who has proof of purchase and retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.

2. Exclusions from Warranty

This warranty does not apply to any products:

a. That have been improperly installed or have not been properly installed by a qualified, licensed auto mechanic experienced in the installation and removal of suspension products.

b. That have been improperly serviced, that have been misused, or that have been modified, altered or subjected to abuse, negligence, accident or collision.

c. Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits.

c. Installed on any vehicle that has been used for rallying, racing or racing-type activities or extreme off-road use.

d. Presented for warranty coverage by a person other than the purchaser.

e. Presented for warranty coverage after being used on a vehicle other than the one on which it was originally installed.

3. Reservation of Rights

Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.

4. Exclusion of Other Warranties

This Warranty is the entire and only Warranty for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description. The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty.

There are no warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose, which extend beyond the description on the face hereof. Any implied warranties are disclaimed to the fullest extent permitted by law and shall in no event exceed the purchase price of the product. These warranties do not cover consequential damages, loss of time or revenues, inconvenience, loss of use of the vehicle, damage to the vehicle or components of the vehicle, reimbursement for labor, any other type of consequential damages, or other incidental or indirect damages.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages; in such states the above limitations or exclusions may not apply. These Warranties give the Purchaser specific legal rights, and the Purchaser may have other rights that may vary from state to state.

5. Warranty Claim Procedure

To make a claim, the Purchaser should contact the Eibach dealer/ distributor from which the Products were originally purchased. The dealer/distributor should then contact Eibach to obtain a Return Goods Authorization (RGA) number to return the Products to Eibach.

Any and all returns must be accompanied by (1) an RGA number, (2) a sales receipt verifying the purchase of the Products, and (3) a statement containing the Purchaser's name, address, make and model of the vehicle, and a brief description of the claimed defect, including the circumstances under which the defect occurred.

Warranty related inquiries should be mailed to the following address:

Eibach Suspension Technology.

Unit 3/4 Prosperity Parade Warriewood NSW 2102

Eibach will not accept Product returns without the RGA number, receipt and statement described above. C.O.D. or collect shipments will be refused. Once the returns are received at Eibach, Eibach will evaluate the Products, verify the sales receipt, and investigate the statement.

The Purchaser is responsible for returning the Products to the Eibach dealer/distributor, including shipping costs as well as costs incurred for removing and installing the Products on the vehicle. Eibach does not warranty labor costs.

SKU 974
Brand Eibach Suspension Technology
Shipping Weight 1.5000kg
Shipping Size 0.140 x 0.060 x 0.580m
Unit Of Measure pair
Assembled Length 0.580m
Assembled Width 0.140m
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Spring Large OD (mm) 43.2
Spring Small OD (mm) 43.2
Spring Free Length (mm) 508

More From This Category