ZETA RACING SUSPENSION REAR SUSPENSION LOWERING KIT

ZETA RACING SUSPENSION REAR SUSPENSION LOWERING KIT SPECIFICATIONS:

- Low down your rear suspension without disassemble rear shock unit.

- Push down seal head from out side of damper, and install this kit to make 30 mm lowering your suspension with keeping its function.

- Make rear suspension fully extended length shorter, but not change length when the shock is shortened. Keep clearance between wheel and under fender even on lowering.

- Can be used with lowering link.

- Available 46 mm size for KYB / WP and 50 mm size for KYB / SHOWA / WP rear suspension

<iframe width="560" height="315" src="https://www.youtube.com/embed/5pICfLGkDGM" title="ZETA REAR SUSPENSION LOWERING KIT" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

SKU	ZE56-322
Brand	DRC Zeta Hardware
Shipping Weight	0.1000kg
Shipping Size	0.050 x 0.050 x 0.050m
Unit Of Measure	ea
Assembled Width	0.050m

If your Motorcycle is listed below, this product will suit:

Related products

1mm Shock Lowering Stop Washer

6 In Stock

1mm Shock Lowering Stop Washer

(SKU: 30-002-20)

$35.27

Shock Lowering Spacer 14 x 34 x 10

1435 In Stock

Shock Lowering Spacer 14 x 34 x 10

14mm id x 34mm od x 10mm tall(SKU: 30-130-06)

$4.50

48mm KYB SKF Mud Scraper

2 In Stock

48mm KYB SKF Mud Scraper

Removable Scraper(SKU: KIT-MS48KM)

$55.00

Shock Lowering Spacer Kit

1 In Stock

Shock Lowering Spacer Kit

14/16/18mm Shock Lowering Spacer Kit(SKU: 30-004-43)

$198.00

DRZ400E S and SM Suspension Upgrade - Stage 1

In Stock

DRZ400E S and SM Suspension Upgrade - Stage 1

Upgraded Fork & Upgraded Standard Shock(SKU: 13-DRZ400-STG1)

$1,495.00

HiCalibre Shock Spring 59 x 275 Common Fitment: Ohlins 00596-

3 In Stock

HiCalibre Shock Spring 59 x 275 Common Fitment: Oh

Proudly made in the USA(SKU: 20-076)

From $245.00

Kayaba (KYB) Genuine Parts Rear Shock Dust seal KYB 16mm x 31

14 In Stock

Kayaba (KYB) Genuine Parts Rear Shock Dust seal KY

OEM KYB Japan Motorcycle Suspension Service Parts(SKU: 120301600101)

$14.93

Kayaba (KYB) Genuine Parts Shock Main Shaft Dust Seal

8 In Stock

Kayaba (KYB) Genuine Parts Shock Main Shaft Dust

OEM KYB Japan Motorcycle Suspension Service Parts(SKU: 120301600401)

$16.98

Xtrig Triple Clamps Rocs Tech YZ250 15-24

1 In Stock

Xtrig Triple Clamps Rocs Tech YZ250 15-24

(SKU: 40201023)

$845.00

More From This Category

KYB Factory RCU Shock Gas Bladder Cap - 54mm - Bare

2 In Stock

KYB Factory RCU Shock Gas Bladder Cap - 54mm - Bar

Genuine KYB Factory Race Parts(SKU: 60032009)

$87.99

RCU RESERVOIR BLADDER CONVERSION 49.00mm WP XPLOR/ 46mm

4 In Stock

RCU RESERVOIR BLADDER CONVERSION 49.00mm WP XPLOR/

KTM / Husqvarna XPlor PDS & 85cc(SKU: 211-900-110)

$179.95

Krooztune KX450F Shock Bladder Cap 2019-2025 with Schrader valve

5 In Stock

Krooztune KX450F Shock Bladder Cap 2019-2025 with

Proudly made in Australia(SKU: KT-KXF450)

$97.90

Shock Lowering Spacer 14 x 34 x 3

1310 In Stock

Shock Lowering Spacer 14 x 34 x 3

14mm id x 34mm od x 3mm tall(SKU: 30-130-04)

$4.50

RCU PISTON BUSH 46.00x08.00x1.50mm OHLINS

740 In Stock

RCU PISTON BUSH 46.00x08.00x1.50mm OHLINS

(SKU: PB-460815)

$36.95

SHOCK ABSORBER RESERVOIR BLADDER CONVERSION 49.00MM WP XACT PDS/ 46MM

1 In Stock

SHOCK ABSORBER RESERVOIR BLADDER CONVERSION 49.00M

(SKU: 211-900-105)

$179.95

Xtrig Preload Adjuster BETA 2Str. + 4Str. 19-

4 In Stock

Xtrig Preload Adjuster BETA 2Str. + 4Str. 19-

Quickly adjust shock spring preload(SKU: 10600004)

$305.00

Xtrig Shock Preload Adjuster KTM 85SX and Husqvarna TC 85

1 In Stock

Xtrig Shock Preload Adjuster KTM 85SX and Husqvarn

Quickly adjust shock spring preload(SKU: 10500003)

$305.00

KYB Soft High Speed Adjuster Spring. Short SDEHSAS

6 In Stock

KYB Soft High Speed Adjuster Spring. Short SDEHSAS

(SKU: 30-002-18)

$77.00

T-Tech Gas Cap 50 With Gas Port Extended Length BMW R1200 1250 GS GSA Rear

5 In Stock

T-Tech Gas Cap 50 With Gas Port Extended Length BM

(SKU: TTGCCPL50)

$88.00

RCU RESERVOIR BLADDER CONVERSION 49.00mm SACHS

2 In Stock

RCU RESERVOIR BLADDER CONVERSION 49.00mm SACHS

Sachs 49mm(SKU: 211-900-125)

$179.95

Krooztune WP XPLOR XACT EXC / XCW Rear Shock Lowering Plate

4 In Stock

Krooztune WP XPLOR XACT EXC / XCW Rear Shock Lower

Proudly made in Australia(SKU: KT-XPLORDS)

From $45.00

Honda CRF1000 CRF1100 Africa Twin Shock Upgrade Kit

11 In Stock

Honda CRF1000 CRF1100 Africa Twin Shock Upgrade Ki

Eat up bumps, ruts and washouts for breakfast(SKU: 25-066-29)

$350.00

RCU PISTON BUSH 50.00x13.00x1.00mm WP 2012-2015

6 In Stock

RCU PISTON BUSH 50.00x13.00x1.00mm WP 2012-2015

(SKU: PB-501310)

$36.95

Teknik Shock Absorber Piston Bush (46x13.0x1.25) -WP (XPLOR)

96 In Stock

Teknik Shock Absorber Piston Bush (46x13.0x1.25) -

Super Low Friction(SKU: LFPB-4613125)

$34.96

Lanier Shock Preload Adjuster WP XPlor PDS

1 In Stock

Lanier Shock Preload Adjuster WP XPlor PDS

(SKU: LOCK_RING_WPXPLOR)

$132.00

Non-Rebuildable Shock Regas Valve - Weld In

34 In Stock

Non-Rebuildable Shock Regas Valve - Weld In

Standard M5 Schrader Valve(SKU: 22-600-01)

$33.00

Shock Lowering Spacer 16 x 38 x 5

618 In Stock

Shock Lowering Spacer 16 x 38 x 5

16mm id x 38mm od x 5mm tall(SKU: 30-130-09)

$4.50

Xtrig Preload Adjuster YZ250F 14-18, YZ450F 14-17

2 In Stock

Xtrig Preload Adjuster YZ250F 14-18, YZ450F 14-17

Quickly adjust shock spring preload(SKU: 10200005)

$279.95

Transalp Spring Adaptor Top

11 In Stock

Transalp Spring Adaptor Top

(SKU: 30-113-17)

$40.00

© 2025 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.