The Ohlins FGK138 NIX 30 fork cartridge kit is a front-end upgrade for Ducati 1098, 1198, and 848 models. It is designed to deliver clearer feedback and more controlled damping through the fork stroke. The focus is on stability under braking and a more settled feel when pushing on road or track.

Ohlins | Made to race, perfected to ride

Developed to bring Ohlins damping control to the front end, this NIX 30 cartridge kit is built for riders who want consistent behaviour and better communication from the fork. It provides a tunable platform to suit different tyres, riding styles, and conditions.

Who this fork kit is for

  • Riders chasing improved front-end feel on spirited road rides
  • Track day riders wanting a more composed and predictable front end
  • Owners looking for a cartridge-based upgrade for Ducati 1098, 1198, or 848

Shock design & features

  • NIX 30 fork cartridge kit design
  • Refined damping characteristics aimed at improving braking stability and mid-corner feel
  • Premium internal components for consistent performance over time

Tuning controls

  • Separate compression damping adjustment
  • Separate rebound damping adjustment
  • Designed to support precise tuning for different riding conditions

Is it right for you?

If you want a more communicative and controlled front end without changing the entire fork assembly, the FGK138 NIX 30 cartridge kit is a suitable option. It is intended for riders who value adjustability and consistent damping behaviour on Ducati 1098/1198/848 platforms.

Before you install

Correct installation and setup are important to get the best result from a cartridge kit. Plan for a proper fork service and adjustment of settings to suit your weight, tyres, and riding use.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK138
Model # NIX 30
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front cartridge
Spring Rate Standard 9.5 N/mm
Type Code NIX 30
Product Family NIX 30
Fitted Spring 04744-95

More From This Category