The Ohlins FGK243 NIX 30 fork cartridge kit is built to improve front-end control and consistency on the Aprilia RS 660. It focuses on clear rider feedback under braking and through the middle of the corner, with damping behaviour designed to stay composed as pace increases. Adjustment is provided to help tailor feel for road riding and occasional track use.

Ohlins | Made to race, perfected to ride

Developed with Ohlins suspension know-how, this cartridge kit is intended for riders who want more precision from the standard fork without changing the character of the bike. The goal is better stability and communication from the front tyre.

Who this kit is for

  • Aprilia RS 660 riders chasing improved braking stability and mid-corner support
  • Street riders who want a calmer, more controlled front end
  • Riders doing occasional track days who need more tuning range and consistency

Shock design & features

  • NIX 30 fork cartridge kit for the front suspension
  • Designed to improve front-end feedback and stability
  • Premium internal components aimed at consistent performance and durability

Tuning controls

  • Separate compression and rebound adjustment for targeted tuning
  • Intended to make it easier to dial-in feel for different roads and riding styles

Before you install

  • Confirm compatibility with your Aprilia RS 660 model and fork configuration before fitting
  • Professional installation is recommended to ensure correct assembly and setup

Serviceability/lifecycle

As a serviceable Ohlins cartridge kit, performance can be maintained over time with routine suspension servicing and oil changes as required by use and conditions.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK243
Model # NIX 30
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Type Code NIX 30
Fork Length (mm) 697.0
Stroke Metal to Metal (mm) 120.0
Product Family NIX 30
Notes 08790-xx series spring
Fitted Spring Sold separately, see notes.

More From This Category