The Öhlins FGRT301 is a complete 48 mm front fork assembly developed for high-performance road and custom applications, originally engineered for the Ducati Diavel. Built around proven Öhlins NIX cartridge technology, it combines precise damping control with a visually distinctive Blackline finish suited to modern performance and heritage-style motorcycles.

Why Choose the Öhlins FGRT301

The FGRT301 delivers measurable improvements in front-end feedback, braking stability and steering control while offering full external adjustment for accurate setup. Its split-function damping layout and lightweight construction make it suitable for both aggressive street riding and high-performance custom builds.

Key Features

  • 48 mm complete front fork with Öhlins NIX cartridge technology
  • 30 mm cartridge system for consistent, controlled damping performance
  • Split-function design with compression damping in one leg and rebound damping in the other
  • Spring preload adjustment via top caps
  • Weight- and stress-optimised fork bottom design
  • Reduced overall weight compared to conventional OEM forks
  • Blackline finish suitable for custom and performance applications

Specifications

  • Fork diameter: 48 mm
  • Damping system: Öhlins NIX, split compression and rebound
  • Adjustments: Compression, rebound and spring preload
  • Cartridge size: 30 mm
  • Application: Model-specific complete front fork assembly

Upgrade Your Ride

Pair the FGRT301 with compatible suspension systems or consult the Teknik Motorsport suspension workshop for professional setup, spring selection and installation support.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGRT301
Model # FGRT 200 (B)
Barcode # FGRT301
Brand Ohlins
Shipping Weight 10.0000kg
Shipping Size 0.400 x 0.200 x 0.950m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front Fork
Spring Rate Standard 9.5 N/mm
Type Code FGRT 200 (B)
Fork Length (mm) 765.0
Stroke Metal to Metal (mm) 120.0
Product Family Custom 48 Blackline
Notes 48mm Innertube
Fitted Spring 04744-95

More From This Category