The Ohlins FGRT817 FGRT 800 front fork complete is engineered to deliver superior performance and control for Kawasaki ZX-10R riders. This fork unit improves braking stability and mid-corner feel, providing a composed and communicative front end. Its precise damping characteristics and separate compression and rebound adjustments allow riders to tailor the suspension setup for both spirited street riding and occasional track use. The premium internal components ensure consistent performance and durability, enhancing rider confidence through improved feedback and stability.

Key Features

  • Enhanced front-end feedback and braking stability
  • Separate compression and rebound adjustment for precise tuning
  • Easy setup designed for road and occasional track use
  • Premium internals for consistent performance and reliability

Installation Notes

Length: 740mm; Stroke: 120mm; Fitted spring part number: 04744-10.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGRT817
Model # FGRT 800
Brand Ohlins
Shipping Weight 10.0000kg
Shipping Size 0.400 x 0.200 x 0.950m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front Fork
Spring Rate Standard 10.0 N/mm
Type Code FGRT 800
Fork Length (mm) 740.0
Stroke Metal to Metal (mm) 120.0
Product Family FGRT 800
Fitted Spring 04744-10

More From This Category