Fork Bare Inner Tube - Carbon Coating - Yamaha Tenere 700 - 2020 2021 2022 2023

Genuine OEM Kayaba Motorcycle Suspension Parts: 160174301001

Yamaha 2020-up Tenere 700

Diamond-Like Carbon Coated Fork Inner Tubes

Sold Individually

Warranty covers defect in material and workmanship in the KYB product. KYBs sole and exclusive obligation under this warranty is limited to the exchange/replacement of a defective KYB product in accordance with this limited warranty. There is no warranty on vehicles used in competition or used in a competition like manner.

SKU	160174301001
Brand	Kayaba (KYB) Genuine Motorcycle Parts
Shipping Weight	1.2000kg
Shipping Size	0.070 x 0.070 x 0.660m
Unit Of Measure	ea
Type	KYB Factory Parts
Format	No Format Defined

See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Fork Inner Tube Ø d (mm)	39.0
Fork Inner Tube Ø d (mm)	650
Outside Ø D (mm)	43.0

Yamaha T7 Tenere 700 (XTZ690)

Yamaha T7 Tenere 700 (XTZ690) Suspension & Upgrades

Read our Featured Bike Article

Related products

Seal Head Depressing Tool 40-50mm

19 In Stock

Seal Head Depressing Tool 40-50mm

Saves seals and makes it easier to get at circlips(SKU: 93-020-00)

$44.00

Showa Genuine Parts Slide pipe Ø49 L=595mm / 2019-2023 KX450F DLC BLACK

2 In Stock

Showa Genuine Parts Slide pipe Ø49 L=595mm / 2019-

Showa Genuine Motorcycle Suspension Parts(SKU: F30504908)

$600.00

KYB Factory Innertube KIT DLC 592mm x 45mm x 48mm KXF/KTM/CRF

4 In Stock

KYB Factory Innertube KIT DLC 592mm x 45mm x 48mm

Genuine KYB Factory Race Parts(SKU: 160174803001)

$447.21

Fork Inner Tube Bare - STD - Tenere 700 2019+

5 In Stock

Fork Inner Tube Bare - STD - Tenere 700 2019+

Original KYB Japan Motorcycle Suspension Parts(SKU: 110794310501)

$298.55

Motion Pro 08-080648 5 in 1 Damper Rod Bleed Tool

3 In Stock

Motion Pro 08-080648 5 in 1 Damper Rod Bleed Tool

Motorcycle Suspension Tools(SKU: 08-080648)

$66.00

Fork Inner Tube Bare - STD - Stark

1 In Stock

Fork Inner Tube Bare - STD - Stark

Original KYB Japan Motorcycle Suspension Parts(SKU: 110794824101)

$298.55

More From This Category

XPLOR Fork Undrilled Bottoming Cone Hydro stop 48601619S

15 In Stock

XPLOR Fork Undrilled Bottoming Cone Hydro stop 486

(SKU: 30-160-02)

$49.50

Krooztune Supercross Spring Seat KYB 48mm / Showa 49mm

999 In Stock

Krooztune Supercross Spring Seat KYB 48mm / Showa

Proudly made in Australia(SKU: KT-SXFFSS)

From $309.95

5mm Fork Preload Spacers for 25mm cartridges SDEFSP25-25

6 In Stock

5mm Fork Preload Spacers for 25mm cartridges SDEF

2.5 mm PAIR(SKU: SDEFSP25-25)

$10.00

KYB Factory Valve cap aluminium big

8 In Stock

KYB Factory Valve cap aluminium big

Genuine KYB Factory Race Parts(SKU: 160030000101)

$23.54

XPLOR Fork Upgrade Kit for WP XPlor 48mm Forks

10 In Stock

XPLOR Fork Upgrade Kit for WP XPlor 48mm Forks

KTM & Husqvarna & GasGas 125 / 250 / 350 / 450 / 500(SKU: 30-160-01)

$745.00

Showa 10mm Fork Bottoming Piston Retainer

27 In Stock

Showa 10mm Fork Bottoming Piston Retainer

Suits most Showa forks with 10mm rod SOLD AS A PAIR(SKU: 30-003-00)

$71.50

Lainer Showa Free Piston set Honda CRF250 2013-2014

2 In Stock

Lainer Showa Free Piston set Honda CRF250 2013-201

(SKU: SHOWA_FREE_PISTX2_38X10)

$275.00

WP to KYB Axle Lug set. 48mm KTM Husqvarna Gas Gas 2015-

5 In Stock

WP to KYB Axle Lug set. 48mm KTM Husqvarna Gas Gas

Flat bottom type bottoming cones/hydraulic locks. (SKU: 30-152-01)

$880.00

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Kit - Gen1 - 2019 Husky/KTM

6 In Stock

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Ki

Proudly made in Australia(SKU: KT-WPXPKIT-19)

$495.00

Krooztune Showa 49mm TAC Air Fork to SFF Coil Spring Conversion Kit. 2016-2017 CRF250R. Select Spring

2 In Stock

Krooztune Showa 49mm TAC Air Fork to SFF Coil Spri

Proudly made in Australia(SKU: KT-TACSPGKIT-CRF2)

$529.95

Spring Perch Kit - All WP Bladder Forks

2 In Stock

Spring Perch Kit - All WP Bladder Forks

125/150/250 SX & 250/450 SXF & TC 250/450 & FC/FE 250(SKU: 30-004-38)

$176.00

Showa GPE Axle Holder Lug Foot Left Black / HONDA CRF 17-25

3 In Stock

Showa GPE Axle Holder Lug Foot Left Black / HONDA

Showa Genuine Motorcycle Suspension Parts(SKU: F448HON01)

$605.00

Krooztune Showa 49mm TAC Air Fork to SFF Coil Spring Conversion Kit - 2015 CRF250R Select spring

1 In Stock

Krooztune Showa 49mm TAC Air Fork to SFF Coil Spri

Proudly made in Australia(SKU: KT-TACSPGKIT-CRF1)

$529.95

M6x0.5 X 12mm Threaded Top Hat

100 In Stock

M6x0.5 X 12mm Threaded Top Hat

(SKU: 26-084-05)

$5.50

KYB Factory Front Fork Outertube Protection (Pair) KYB 36mm

1 In Stock

KYB Factory Front Fork Outertube Protection (Pair)

Genuine KYB Factory Race Parts(SKU: 000.0751)

$64.43

Krooztune WP 43mm AER Air Fork to Coil Spring Conversion Kit - KTM / GasGas / Husqvarna 85cc

6 In Stock

Krooztune WP 43mm AER Air Fork to Coil Spring Conv

Proudly made in Australia(SKU: KT-WPATS43)

$529.95

Enzo Technica Works Fork Spring Tubes

14 In Stock

Enzo Technica Works Fork Spring Tubes

(SKU: ER-TFST)

From $495.00

Ohlins Road & Track Rebound Topout Spring Perch

27 In Stock

Ohlins Road & Track Rebound Topout Spring Perch

(SKU: 26-084-04)

$5.50

SDI Front Fork Spring Perches Slots (Pair) KYB 48mm

4 In Stock

SDI Front Fork Spring Perches Slots (Pair) KYB 48m

(SKU: SDETCVY18-MX-Set)

$261.95

FRONT FORK WORKS HONDA CRF 250/450 2017-25

1 In Stock

FRONT FORK WORKS HONDA CRF 250/450 2017-25

Performance and looks!(SKU: FFWHON001)

$6,049.99

© 2026 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.