The TracTive X-CHANGE Dynamic ESA front cartridge fork upgrade is a closed, pressurised cartridge system designed for motorcycles fitted with electronic semi-active suspension. It replaces the internal damping assembly in one fork leg while retaining the OEM spring. The sealed cartridge architecture helps maintain consistent damping control by keeping the damping circuit isolated and pressurised.

Design & features

  • Closed, pressurised cartridge design to help reduce cavitation and maintain damping consistency.
  • Designed to integrate with the motorcycle’s Dynamic ESA system.
  • One fork leg kit that reuses the OEM spring.

Tuning Controls

Damping adjustment is handled electronically through the bike’s Dynamic ESA system. Changes are made using the motorcycle’s onboard controls rather than external manual adjusters on the cartridge.

Who is this for?

Suited to riders who want more controlled and consistent front-end response while keeping the convenience of Dynamic ESA electronic adjustment. A good fit where maintaining the original spring and standard fitment approach is preferred.

Before You Install

  • Confirm compatibility with your specific Dynamic ESA-equipped model and ensure you are ordering the correct “one fork leg” configuration.
  • As the OEM spring is reused, ensure it matches your typical riding load and intended use.
  • Professional installation is recommended for correct assembly, oil fill, and system function checks.

Serviceability/Lifecycle

This cartridge is designed to be serviceable. Periodic maintenance helps keep damping performance consistent over time, particularly on bikes used frequently or across varied conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35BM15-P8077-PNP-OR
Model # 35BM15-P8077-PNP-OR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure Set
Type eX-CHANGE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Electronic
Seat Height Change (mm) Standard Height
Type Code X-CHANGE ESA

You May Also Like

More From This Category