The Tractive X-TREME Fork Cartridge Kit for the BMW R nineT replaces the stock fork internals with a closed, pressurised cartridge architecture designed to deliver more consistent damping and clearer front-end feedback. By separating and controlling the damping circuit inside a sealed unit, it helps reduce oil aeration and maintain predictable behaviour over changing road conditions. Spring preload adjustment is included for practical setup changes to suit rider load and preference.

Design & features

  • Closed, pressurised cartridge design for consistent damping control.
  • Sealed cartridge architecture helps minimise foaming and fade from aeration.
  • Purpose-built cartridge internals intended to improve support under braking and stability through corners.

Tuning Controls

  • Preload adjustment for setting sag and balancing ride height for different rider weights and loads.
  • Dual damping adjustment (compression and rebound) to tune ride comfort and front-end control.

Base Setup (factory preset)

Start from the supplied baseline settings and make changes one at a time. Preload is typically used first to achieve appropriate sag, then compression and rebound are refined to match your tyres, road surfaces, and riding pace.

Before You Install

  • Confirm model compatibility for your BMW R nineT before installation.
  • Installation requires correct fork disassembly and oil handling; professional fitment is recommended if you are not experienced with suspension work.
  • After installation, re-check sag and road-test carefully before increasing pace.

Serviceability/Lifecycle

Tractive cartridge kits are designed to be fully serviceable. Periodic maintenance by a qualified suspension technician helps preserve damping consistency and long-term reliability.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35BM14-D5352-TR-01
Model # 35BM14-D5352-TR-01
Barcode # 35BM14D5352TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 690.0
Spring Rate Standard 7.2 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 99.0
Fitted Spring 7.2-230

More From This Category