The TracTive X-TREME rear shock for the Husqvarna Norden 901 is a closed, pressurised monotube design with an oil/gas separation piston for consistent damping and reduced cavitation under demanding use. This version is supplied in a lowered configuration, reducing ride height by 35mm. Adjustment is provided for rebound and both high- and low-speed compression to support precise tuning for load, terrain and riding style.

Design & features

  • Closed, pressurised shock architecture
  • Oil/gas separation piston design to maintain damping consistency
  • Lowered configuration: -35mm ride height change
  • External reservoir (swivel-style) layout
  • Supplied with a spring

Tuning Controls

  • Rebound damping adjustment
  • Compression damping adjustment (high- and low-speed circuits)

Who is this for?

  • Riders wanting a 35mm reduced ride height on a Norden 901
  • Those who want broad damping adjustability for mixed road and adventure conditions
  • Riders carrying changing loads who value fine control over chassis behaviour

Before You Install

  • Confirm the lowered ride height change suits your intended geometry and ground clearance needs
  • Check for clearance around the reservoir and adjusters on your bike
  • After installation, set sag and then tune rebound and compression progressively

Serviceability/Lifecycle

  • Pressurised monotube shocks are serviceable; periodic servicing helps maintain damping performance over time
  • If performance changes (fade, noise, leakage, or inconsistent damping), schedule inspection and service

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HQ22-T9308-TR
Model # Active Feb 2025
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME + HPA
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -35
Shock Length Eye to Eye (mm) 361.0
Type Code X-TREME
Stroke Metal to Metal (mm) 72.0

More From This Category