The Tractive X-TREME shock for the Yamaha Tenere 700 is a closed, pressurised damper built around a sealed cartridge design to maintain consistent damping and reduce cavitation under sustained use. It uses a remote reservoir layout to manage oil and gas separation and support stable performance across mixed conditions. This model includes external adjustments for rebound and both low- and high-speed compression, plus a hydraulic preload adjuster for convenient spring preload changes.

Design & features

  • Closed, pressurised shock with a sealed cartridge architecture for consistent damping
  • Remote reservoir design with oil/gas separation
  • Supplied with a spring and a hydraulic preload adjuster

Tuning Controls

  • Rebound damping adjustment
  • Low-speed compression adjustment
  • High-speed compression adjustment
  • Hydraulic preload adjustment

Base Setup (factory preset)

This shock is supplied with a factory baseline setup intended to provide a workable starting point. Fine-tuning is performed via the external rebound and compression adjusters, with preload changes handled at the hydraulic adjuster.

Before You Install

  • Confirm compatibility with your Yamaha Tenere 700 for the specified model years indicated by the product code
  • Check clearance and routing for the remote reservoir and hydraulic preload adjuster before final mounting
  • Set initial preload and damping from the delivered baseline, then adjust methodically after test rides

Serviceability/Lifecycle

As a closed, pressurised design with a separated gas chamber, the shock is built to be serviced to restore performance over time. Service intervals and settings should be based on use conditions and maintained by a suspension technician.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46YA19-T5514-TR
Model # 46YA19-T5514-TR
Barcode # 46YA19T5514TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -35
Shock Length Eye to Eye (mm) 359.0
Spring Rate Standard 85 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 85.0
Notes PDSII anti-bottoming
Fitted Spring 85-180

You May Also Like

More From This Category