Showa Genuine Parts Front Fork Works for Honda CRF 250/450 (2017-2025)

The Showa Genuine Parts Front Fork Works for Honda CRF 250 and 450 models (2017-2025) is engineered to provide workshop-level suspension performance. This front fork assembly is designed to reduce stiction, resulting in smoother and more responsive suspension action. Its precise construction ensures a clean installation process, maintaining the integrity of sealing surfaces and alignment for consistent handling.

Key Features

Designed specifically for Honda CRF 250 and 450 models from 2017 to 2025
Reduces stiction to improve suspension smoothness and rider control
Enhances front fork response for sharper handling and stability
Built to workshop standards for reliable durability and consistent performance

Installation Notes

During installation, ensure a clean working environment and protect sealing surfaces to prevent damage. Torque all fasteners to manufacturer specifications and verify fork alignment. After assembly, perform a test ride to fine-tune suspension settings according to terrain and rider load. Installation details may vary by model year; confirm compatibility before ordering.

SKU	FFWHON001
Brand	Showa Genuine Parts
Shipping Weight	15.0000kg
Shipping Size	0.350 x 0.150 x 1.200m

See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

You May Also Like

Ohlins DMX0210 TTX Flow DV Shock Rear for Honda CRF 450R

3 In Stock

Ohlins DMX0210 TTX Flow DV Shock Rear for Honda CR

Ohlins Suspension - Engineered for Performance(SKU: DMX0210)

$2,999.95

Related products

Enzo Racing KYB AOS Front Fork Cap Compression Adjuster Assembly

27 In Stock

Enzo Racing KYB AOS Front Fork Cap Compression Adj

(SKU: ERFFCA)

From $440.00

KYB Cartridge Kit for WP AER 48 Front Fork

2 In Stock

KYB Cartridge Kit for WP AER 48 Front Fork

Genuine KYB Factory Race Parts(SKU: 162018002501)

$2,868.58

Showa A Kit Suspension for Honda CRF 250/450 2025-2026

1 In Stock

Showa A Kit Suspension for Honda CRF 250/450 2025-

Showa Genuine Motorcycle Suspension Parts(SKU: AKITHON25)

$13,200.00

Enzo Technica Works Fork Spring Tubes

8 In Stock

Enzo Technica Works Fork Spring Tubes

(SKU: ER-TFST)

From $495.00

More From This Category

Fork Preload Kit (39-42mm)

1257 In Stock

Fork Preload Kit (39-42mm)

(SKU: 30-130-23)

$15.00

WP to KYB Axle Lug set. 48mm KTM Husqvarna Gas Gas 2015-

8 In Stock

WP to KYB Axle Lug set. 48mm KTM Husqvarna Gas Gas

Flat bottom type bottoming cones/hydraulic locks. (SKU: 30-152-01)

$880.00

KYB Factory Carbon fiber outertube protection SET

1 In Stock

KYB Factory Carbon fiber outertube protection SET

Genuine KYB Factory Race Parts(SKU: 160150000102)

$158.02

Lainer Compression Kit for WP 4CS Forks Pair

2 In Stock

Lainer Compression Kit for WP 4CS Forks Pair

Italian-engineered Lainer Suspension compression kit(SKU: WP4CS-COMP-ADJ)

$264.00

M6x0.5 X 12mm Threaded Top Hat

100 In Stock

M6x0.5 X 12mm Threaded Top Hat

(SKU: 26-084-05)

$5.50

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Kit - Gen1 - 2017-2018 Husky/KTM

2 In Stock

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Ki

Proudly made in Australia(SKU: KT-WPXPKIT-17-18)

$495.00

KYB Factory Front Fork Outertube Protection (Pair) KYB 48mm all YZF

14 In Stock

KYB Factory Front Fork Outertube Protection (Pair)

Genuine KYB Factory Race Parts(SKU: 000.0379)

$64.43

Krooztune Yamaha YZ 65 85 Fork Length Extension Kit

1 In Stock

Krooztune Yamaha YZ 65 85 Fork Length Extension Ki

Proudly made in Australia(SKU: KT-YAM65FEK)

$209.95

KYB Cartridge Kit for WP XPLOR 48 Front Fork

1 In Stock

KYB Cartridge Kit for WP XPLOR 48 Front Fork

Genuine KYB Factory Race Parts(SKU: 162018002601)

$2,868.58

WORKS HONDA CRF 250/450 2017-25 Upgrade kit

2 In Stock

WORKS HONDA CRF 250/450 2017-25 Upgrade kit

Quality and looks !(SKU: KTWHON001)

$2,858.89

Camel Yamaha T700 Tenere 48mm KYB Conversion Kit

1 In Stock

Camel Yamaha T700 Tenere 48mm KYB Conversion Kit

48mm conversion kit for Yamaha T700 56mm upper clamps(SKU: CAMT756)

$1,994.99

10mm Fork Preload Spacers SDEFSP10

9 In Stock

10mm Fork Preload Spacers SDEFSP10

10.0mm PAIR(SKU: 30-004-16)

$10.00

Lainer WP 48 Xplor Xact Fork Upgrade Kit KTM Husqvarna 2017 on

1 In Stock

Lainer WP 48 Xplor Xact Fork Upgrade Kit KTM Husqv

(SKU: WPXPLOR_MID-COMP_S)

$299.00

Fork Preload Spacer 41.8x31.8x3mm

6036 In Stock

Fork Preload Spacer 41.8x31.8x3mm

41.8mm od x 31.8mm id x 3mm thick - Steel(SKU: 24-014-03)

$1.50

Fork Preload Spacer 38.8x28.6x3mm

5031 In Stock

Fork Preload Spacer 38.8x28.6x3mm

38.8mm od x 28.6mm id x 3mm thick - Steel(SKU: 24-014-02)

$1.50

KYB Factory Front Fork Outertube Protection (Pair) KYB 36mm

2 In Stock

KYB Factory Front Fork Outertube Protection (Pair)

Genuine KYB Factory Race Parts(SKU: 000.0751)

$64.43

Ohlins Road & Track Rebound Topout Spring Perch

27 In Stock

Ohlins Road & Track Rebound Topout Spring Perch

(SKU: 26-084-04)

$5.50

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Kit - Gen1 - 2020 Husky/KTM

4 In Stock

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Ki

Proudly made in Australia(SKU: KT-WPXPKIT-20)

$495.00

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Kit - Gen2 - 2019

3 In Stock

Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Ki

Proudly made in Australia(SKU: KT-XPLORFA2-19)

$595.00

KYB Factory Axle bracket KIT KTM/Husqvarna 15-2025 Left

1 In Stock

KYB Factory Axle bracket KIT KTM/Husqvarna 15-2025

Genuine KYB Factory Race Parts(SKU: 60012041)

$534.82

© 2026 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.