The Ohlins FCX0205 TTX 22 fork cartridge is built to deliver more controlled, predictable front-end behaviour. Developed for Husqvarna FC and TC models, it focuses on improving feel under braking and maintaining composure through the middle of the corner. The damping character is designed to stay consistent and provide clear rider feedback.

Ohlins | Made to race, perfected to ride

Ohlins suspension components are designed for riders who want precise damping control and a more connected front end. The TTX 22 cartridge format is aimed at delivering stable, repeatable performance across changing conditions.

Who this cartridge kit is for

  • Riders chasing improved braking stability and front-end feedback
  • Owners of Husqvarna FC 250, FC 350, FC 450, TC 125, and TC 250 looking for a more composed feel through turns
  • Those who want tuning flexibility via external adjusters

Fork cartridge design & features

  • TTX 22 front fork cartridge kit
  • Premium internal components for consistent, reliable performance
  • Designed to improve mid-corner feel and braking stability

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Fork springs are sold separately
  • Refer to the resources tab for spring recommendations and fitting instructions
  • Note: Eibach 970 series fork springs can be used in this application

Is it right for you?

If you want a front end that feels calmer on the brakes and more communicative through the corner, this TTX 22 cartridge kit is a strong match. If you are unsure about spring selection or setup direction for your riding, sort that first as springs are not included.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FCX0205
Model # T22DR1C1
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code T22DR1C1
Fork Length (mm) 940.0
Stroke Metal to Metal (mm) 292.0
Product Family TTX 22
Notes 08765- spring series *Replaces FCX 205-21*
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01330-

We Also Recommend

More From This Category