The Ohlins FCX1203 TTX 22 fork cartridge front is designed to refine front-end control on Yamaha YZ 250F and YZ 450F models. It focuses on delivering more consistent damping feel to support braking stability and cornering confidence. Built as an internal fork upgrade, it’s intended for riders who want clearer feedback and more tunability from the front suspension.

Ohlins | Made to race, perfected to ride

Ohlins suspension development is centred on controlled damping performance and rider feel. The FCX1203 cartridge is an Ohlins approach to improving how the front end communicates traction and load changes.

Who this cartridge kit is for

  • YZ 250F and YZ 450F riders chasing improved front-end feedback
  • Riders wanting better stability under braking
  • Owners who prefer a tunable fork setup with separate adjustability

Shock design & features

  • TTX 22 front fork cartridge design
  • Premium internal components aimed at consistent damping and durability
  • Developed to improve mid-corner feel and overall suspension response

Tuning controls

  • Separate compression and rebound adjustment to help fine-tune feel and support
  • Adjustment access designed to make trackside or workshop changes straightforward

Before you install

  • Confirm compatibility with your exact Yamaha YZ 250F or YZ 450F model and year before fitting
  • Professional installation is recommended to ensure correct assembly and setup

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FCX1203
Model # T22DR1C1
Barcode # FCX1203
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code T22DR1C1
Fork Length (mm) 953.0
Stroke Metal to Metal (mm) 301.0
Product Family TTX 22
Notes 08765- spring series *Replaces FCX 0203*
Fitted Spring Sold separately, see notes.
Rec. Ohlins Oil 01330-

More From This Category