The Ohlins FCX2205 TTX 22 fork cartridge kit is designed to improve control and front-end feel on selected Husqvarna FC and TC models. With refined damping behaviour, it helps deliver a more composed and communicative front end under braking and through corners. Adjustability is built in so you can tailor the setup to conditions and rider preference.

Ohlins | Made to race, perfected to ride

Built around Ohlins suspension know-how, this cartridge kit targets stability and feedback where it matters most: braking, turn-in and mid-corner support. The goal is consistent damping performance and clearer connection to the front tyre.

Who this cartridge kit is for

  • Riders chasing improved front-end feedback and braking stability
  • Owners of Husqvarna FC 250, FC 350, FC 450, TC 125, TC 150, TC 250 and TC 300
  • Those who want tunability to suit different tracks and conditions

Shock design & features

  • TTX 22 fork cartridge design
  • Refined damping characteristics aimed at better stability and mid-corner feel
  • Premium internal components for consistent, reliable performance

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Confirm compatibility with your exact model and year before installation
  • Correct installation and setup are essential to get the most from the adjustment range

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FCX2205
Model # T22DR1C1
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Type Code T22DR1C1
Fork Length (mm) 940.0
Stroke Metal to Metal (mm) 292.0
Product Family TTX 22
Notes 08765- spring series *Replaces FCX 1205*
Fitted Spring Sold separately, see notes.
Rec. Ohlins Oil 01330-

More From This Category