The Ohlins FKS508 NIX 30 Street Fork Cartridge Front is a front suspension cartridge kit designed for Harley-Davidson Softail models including the Fat Bob, Low Rider S, and Low Rider ST. It is engineered to improve front-end control, feedback, and braking stability for street riding. The damping performance is intended to remain consistent across a range of riding conditions.

Ohlins | Made to race, perfected to ride

Ohlins cartridge kits are built to deliver clearer feel at the front tyre and more composed behaviour under load. This upgrade focuses on control and predictability rather than changing the character of the bike.

Who this kit is for

  • Softail riders wanting improved front-end feedback and confidence
  • Riders looking for better stability under braking
  • Owners who want tuneability for spirited street riding and occasional track use

Shock design & features

  • Cartridge fork upgrade for the front end
  • Premium internal components for consistent damping performance
  • Designed to improve composure and communication from the front suspension

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Confirm model compatibility for your Harley-Davidson Softail (Fat Bob, Low Rider S, Low Rider ST)
  • Professional installation is recommended to ensure correct setup and function
  • Plan time for adjustment to suit your riding style after installation

Need help choosing?

If you are deciding between fork options or want guidance on initial adjustment, Teknik Motorsport can help match the setup to your riding and expectations.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS508
Model # NIX 30 S
Barcode # FKS508
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30 S
Fork Length (mm) 795.0
Stroke Metal to Metal (mm) 130.0
Product Family NIX 30 Street
Notes 08423-xx spring series
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category