The Ohlins HO703 STX 46 Adventure rear shock is built for riders who need consistent control and comfort when the Honda CRF250 Rally is used beyond smooth roads. It is designed to support confidence on rough surfaces and during longer days in the saddle. The focus is stable chassis behaviour and predictable damping feel across changing conditions.

Ohlins | Made to race, perfected to ride

Ohlins suspension is developed with an engineering-first approach to damping quality, heat management and repeatable adjustment. This unit is part of the STX 46 Adventure family, aimed at real-world adventure and touring use where reliability and tunability matter.

Who this shock is for

  • Honda CRF250 Rally owners setting the bike up for adventure and touring use
  • Riders chasing better composure on uneven roads and off-road tracks
  • Anyone carrying extra load at times and wanting a more controlled rear end

Shock design & features

This is a monotube rear mono shock with a 46-series damper layout and a separated oil and gas design to help keep damping consistent. The architecture is intended to improve stability and control when conditions and pace change over a ride.

Tuning controls

Adjustability includes rebound damping and compression damping, allowing you to tailor how the rear recovers after impacts and how firmly it resists movement under load. Spring preload adjustment is included to set ride height and support for rider weight and luggage.

Before you install

  • Confirm fitment for Honda CRF250 Rally and check overall condition of linkage bearings and mounting hardware
  • Set sag and preload first, then fine-tune rebound and compression to suit your terrain and load
  • Record your settings so you can return to a known baseline after changes

Serviceability/lifecycle

Like all performance shocks, this unit is designed to be serviced to maintain damping consistency over time. Periodic inspection and scheduled servicing helps preserve performance, especially when the bike is used in dust, mud or wet conditions.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU HO703
Model # S46HR1C1
Barcode # HO703
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear Mono
Shock Length Eye to Eye (mm) 421.0
Spring Rate Standard 64.0 N/mm
Spring Free Length (mm) 250
Type Code S46HR1C1
Stroke Metal to Metal (mm) 102.0
Product Family STX 46 Adventure
Fitted Spring 60012-14
Spring Colour Yellow
Spring Id 57

More From This Category