The Ohlins YA556 STX 36 twin rear shocks are built for the Yamaha XJR 1300, focusing on controlled damping and consistent ride support for road use. This is an oil/gas separated design aimed at maintaining stability and feel as conditions change. Adjustment is provided so you can tailor the response to your load and riding style.

Ohlins | Made to race, perfected to ride

Ohlins road shocks draw on proven damping architecture to deliver clear chassis feedback without harshness. On the XJR 1300, the twin-shock layout suits riders who want a more composed rear end while keeping the bike’s classic configuration.

Who this shock is for

  • Riders refreshing tired original rear suspension with a modern, serviceable unit
  • Owners who want improved control for spirited road riding and varying road surfaces
  • Riders who regularly change passenger or luggage load and want adjustability to suit

Shock design & features

This STX 36 Twin arrangement uses an oil/gas separated layout to help keep damping consistent. The twin shocks support the XJR’s rear suspension geometry while providing a more controlled response through the stroke.

Tuning controls

  • Rebound damping adjustment to manage how the shock returns after a bump or corner load
  • Compression damping adjustment to tune support over bumps and under acceleration

Base setup (factory preset)

The shocks are supplied with an Ohlins baseline tune intended to suit typical street riding. From this starting point, rebound and compression adjustments let you refine comfort, grip and stability to match tyres, roads and load.

Serviceability/lifecycle

These are fully serviceable Ohlins units. Routine servicing helps maintain damping performance over time, particularly for bikes that see regular use or harder riding.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU YA556
Model # S36PR1C1L
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear Twin
Shock Length Eye to Eye (mm) 325.0 +10/-0
Spring Rate Standard 22.0 - 39.0 N/mm Progressive
Type Code S36PR1C1L
Stroke Metal to Metal (mm) 92.0
Product Family STX 36 Twin
Fitted Spring 00379-01

More From This Category