The Tractive X-PERIENCE fork cartridge kit for the Yamaha Tenere 700 replaces the stock fork internals with a closed, pressurised cartridge design to deliver more consistent damping control across changing conditions. This kit is intended to lower the front end, which can help improve confidence at a standstill and in slow technical riding. The sealed cartridge architecture helps maintain damping stability and reduces the likelihood of fade during sustained use.

Who is this for?

  • Tenere 700 riders who want a lower front ride height for easier handling at low speed and when stopping.
  • Adventure and touring riders looking for more controlled, predictable fork behaviour across mixed surfaces.
  • Riders who prefer a cartridge-based fork solution that is designed to be tuned to rider load and conditions.

Design & features

  • Closed, pressurised cartridge construction for consistent damping behaviour.
  • Sealed internal architecture designed to maintain performance during extended or demanding riding.
  • Cartridge kit format that replaces the standard fork internals.

Tuning Controls

  • Compression damping adjustment.
  • Rebound damping adjustment.

Before You Install

  • Confirm your target lowered front ride height and check overall chassis balance front-to-rear before final setup.
  • Professional installation is recommended to ensure correct assembly and safe operation.

Serviceability/Lifecycle

This cartridge kit is fully serviceable and supports routine maintenance and rebuilds to keep performance consistent over the long term.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 26YA25-D2343-TR
Model # 26YA25-D2343-TR
Barcode # 26YA25D2343TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Shock Length Eye to Eye (mm) 895
Length Change (mm) Lowered -20mm
Spring Rate Standard 6.0 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 180
Notes Hydraulic end-stop
Fitted Spring 6.0-370

More From This Category