The Tractive X-TREME Fork Cartridge Kit for the Yamaha Tenere 700 replaces the stock internal fork damping with a sealed, closed and pressurised cartridge design. This architecture keeps damping more consistent by separating and controlling the internal fluid and gas environment inside the cartridge. The kit is built around adjustable damping so you can tune the fork feel for your load and riding conditions.

Design & features

  • Sealed, closed and pressurised cartridge architecture for consistent damping behaviour.
  • Cartridge kit format intended to replace the internal damping components inside the fork legs.

Tuning Controls

  • Rebound damping adjustment.
  • Compression damping adjustment.

Base Setup (factory preset)

A baseline setting is provided by Tractive to get you started, then fine-tuning is done using the compression and rebound adjusters to suit rider preference, load and terrain.

Before You Install

  • Confirm fitment for your Yamaha Tenere 700 and model year before installation.
  • Professional installation is recommended as fork disassembly and correct oil handling are required.

Serviceability/Lifecycle

As a closed, pressurised cartridge system, servicing should be carried out at appropriate intervals to maintain oil condition and internal performance.

Is It Right For You?

This kit suits Tenere 700 riders who want a more tuneable front end with independent compression and rebound control, and who value the consistency benefits of a sealed, pressurised cartridge layout.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35YA19-D5319-TR
Model # 35YA19-D5319-TR
Barcode # 35YA19D5319TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Raised +25
Shock Length Eye to Eye (mm) 950.0
Spring Rate Standard 6.0 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 215.0
Notes Hydraulic end-stop
Fitted Spring 6.0-390

You May Also Like

Related products

More From This Category