The Tractive X-TREME shock for the BMW HP2 Enduro is a closed, pressurised rear shock built around a sealed cartridge architecture. This design keeps damping performance consistent by separating and controlling the internal gas pressure, helping resist aeration during demanding use. It is configured with triple adjustment for tuning rebound, compression and high-speed compression.

Design & features

  • Closed, pressurised shock design with a sealed cartridge for stable damping performance.
  • Remote reservoir configuration to support consistent oil control under load.
  • Supplied as a sprung shock assembly.

Tuning Controls

  • Rebound damping adjustment.
  • Compression damping adjustment.
  • High-speed compression damping adjustment.

Who is this for?

  • BMW HP2 Enduro riders who want broader damping adjustability for different loads, surfaces and riding conditions.
  • Riders who prefer a fully tuneable rear shock with separate control over rebound and compression behaviour.

Before You Install

  • Confirm fitment for your exact BMW HP2 Enduro model and year before installation.
  • Set sag and damping to a sensible baseline after fitting, then adjust in small steps to suit your riding conditions.

Serviceability/Lifecycle

  • As a pressurised shock, correct servicing requires appropriate tools and procedures to maintain internal pressure and damping consistency.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM05-T5543-TR
Model # 46BM05-T5543-TR
Barcode # 46BM05T5543TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 416.0
Spring Rate Standard 80 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 107.0
Notes PDSII anti-bottoming
Fitted Spring 80-235

More From This Category