The Tractive X-TREME Shock for KTM 1050 ADVENTURE is a closed, pressurised 46 mm rear shock designed around a sealed cartridge architecture to keep damping consistent across demanding use. It uses an oil/gas separated internal design rather than an emulsion layout. This model includes a ride height change, allowing you to alter rear ride height as part of setup.

Design & features

  • Closed, pressurised shock design for stable damping behaviour.
  • Oil/gas separation via an internal separation piston (not an emulsion shock).
  • Built on a sealed cartridge-style internal architecture.

Tuning Controls

  • Triple-adjustable damping: compression and rebound adjustment are provided, with an additional damping adjustment circuit.
  • Mechanical (non-electronic) adjusters.

Base Setup (factory preset)

Supplied with a baseline setup intended to be tuned from there using the external adjusters. Final settings should be set to suit rider mass, load and typical riding conditions.

Before You Install

  • Confirm fitment for your exact KTM 1050 ADVENTURE variant and any accessories that may affect clearance.
  • Plan for ride height adjustment during installation so chain tension and geometry can be checked after setup changes.

Serviceability/Lifecycle

This is a rebuildable shock, intended to be serviced as part of normal suspension maintenance to keep performance consistent over time.

Is It Right For You?

Choose this option if you want broad tuning range with triple-adjustable damping and the ability to change rear ride height as part of chassis setup.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT15-T5326-TR
Model # 46KT15-T5326-TR
Barcode # 46KT15T5326TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Mechanical
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -30
Shock Length Eye to Eye (mm) 391.0
Spring Rate Standard 170 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 67.6
Notes PDSII anti-bottoming
Fitted Spring 170-180

More From This Category