The Tractive X-TREME shock for the Triumph 1200 Explorer is a closed, pressurised rear shock built around a sealed cartridge architecture. This design keeps the damping oil and gas separated and stable, helping maintain consistent control across long rides and varying conditions. It is configured with external adjustment for both compression and rebound damping.

Design & features

  • Closed, pressurised shock design with a sealed cartridge for consistent damping behaviour.
  • Oil/gas separation via an internal separation piston (not an emulsion design).
  • Supplied as a spring-equipped shock assembly.

Tuning Controls

  • Compression damping adjustment.
  • Rebound damping adjustment.

Base Setup (factory preset)

Factory settings are established by Tractive and intended as a functional starting point for general riding. Fine-tuning compression and rebound can be used to match load, tyres, and riding conditions.

Who is this for?

  • Triumph 1200 Explorer riders who want a serviceable, pressurised shock design with external damping adjustments.
  • Riders who regularly vary riding conditions and prefer the ability to tune compression and rebound.

Before You Install

  • Confirm fitment for your specific Triumph 1200 Explorer variant and model year before installation.
  • Set sag and baseline damping after installation to suit your load and riding style.

Serviceability/Lifecycle

The sealed, pressurised cartridge architecture is designed for long-term performance and can be maintained through periodic servicing to refresh oil and restore damping consistency over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46TR12-T7303-TR
Model # 46TR12-T7303-TR
Barcode # 46TR12T7303TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 374.0
Spring Rate Standard 130 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 75.0
Notes PDSII anti-bottoming
Fitted Spring 130-205

You May Also Like

More From This Category