The Tractive eX-PERIENCE shock for the BMW R 1200 GS is a replacement rear shock built around a closed, pressurised monotube damper design with separated oil and gas. This architecture helps maintain consistent damping behaviour across varied conditions by reducing foaming and keeping the damping circuit stable. It is supplied as a sprung shock unit for straightforward fitment in place of the original rear shock.

Design & features

  • Closed, pressurised monotube shock with separated oil and gas (internal separation piston)
  • Sprung shock assembly

Tuning Controls

  • Electronic adjustment (plug-and-play style electronic configuration)
  • Remote reservoir integrated into the shock body (fixed reservoir layout)

Base Setup (factory preset)

This shock is supplied with a baseline damping and spring configuration intended as a general-purpose starting point. Final performance depends on correct spring rate choice and matching the settings to your load and riding conditions.

Who is this for?

  • BMW R 1200 GS riders wanting an electronically adjustable rear shock solution
  • Owners who ride with varying loads (luggage or passenger) and prefer electronic control of damping

Before You Install

  • Confirm model fitment and compatibility for your specific BMW R 1200 GS variant and year
  • Inspect and address any worn linkage, bearings, or mounting hardware before installation
  • After installation, set sag and verify the electronic adjustment functions as intended

Serviceability/Lifecycle

As a pressurised, separated oil/gas design, the shock is built to be serviceable to restore performance over time. Periodic servicing helps maintain damping consistency and component life.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM13-P4140-TR
Model # 46BM13-P4140-TR
Barcode # 46BM13P4140TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Electronic & Compression High + Low Speed
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 389.0
Spring Rate Standard 50 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 95.0
Fitted Spring 50-205

You May Also Like

Related products

More From This Category