The Tractive eX-PERIENCE Shock for the BMW F 850 GS Adventure is a closed, pressurised rear shock built around a gas-separated damper design for consistent control over long distances and varying conditions. It uses an external reservoir to keep the gas and oil separated, helping damping remain stable during extended use. This unit is supplied with a spring fitted and is designed as a complete replacement shock assembly.

Design & features

  • Closed, pressurised shock with a separation piston to keep oil and gas separated
  • External reservoir for improved damping consistency during sustained riding
  • Supplied with spring fitted

Tuning Controls

  • Rebound damping adjustment
  • Preload adjustment via a hydraulic preload adjuster (remote hose type)

Base Setup (factory preset)

This shock is supplied with an internal baseline valving setup from Tractive, intended to provide a balanced starting point for general adventure-touring use. Final ride feel will depend on rider weight, load, and tyre choice, so adjustment is recommended after installation.

Who is this for?

  • BMW F 850 GS Adventure riders looking for controlled damping across mixed road and light off-road use
  • Riders who regularly vary load (luggage/passenger) and want convenient preload changes
  • Owners who prefer a pressurised, gas-separated shock architecture for consistency on long rides

Before You Install

  • Confirm your exact model and fitment for the BMW F 850 GS Adventure before installation
  • Set sag and preload after fitting, then fine-tune rebound to suit your load and riding conditions
  • Check clearance and routing for the remote reservoir and hydraulic preload hose during installation

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM19-P4703-TR
Model # 46BM19-P4703-TR
Barcode # 46BM19P4703TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 395.0
Spring Rate Standard 150 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 86.0
Fitted Spring 150-205

You May Also Like

Related products

More From This Category