The Tractive eX-PERIENCE Shock for BMW R 1200 GS is a closed, pressurised shock built around a sealed cartridge design to maintain consistent damping over long rides. It separates oil and gas internally to reduce aeration and keep response predictable as conditions change. This configuration is aimed at riders who want controlled, repeatable performance for touring and mixed-use riding.

Design & features

  • Closed, pressurised shock architecture for stable damping and reduced fade in sustained use
  • Sealed cartridge construction to support consistent oil control and long-term performance
  • Oil/gas separation (not an emulsion design) to help maintain damping consistency
  • Supplied as a spring-equipped unit

Tuning Controls

  • Triple-adjustable damping: independent control of compression and rebound, with separate high- and low-speed compression adjustment

Base Setup (factory preset)

This shock is supplied with a baseline setup intended to be a sensible starting point for general road and touring use. Fine-tuning should be based on load, typical surface conditions, and rider preference.

Who is this for?

  • BMW R 1200 GS riders prioritising comfort and control across varied road conditions
  • Touring riders carrying luggage or a passenger who want a broader tuning range
  • Owners who value repeatable damping behaviour from a pressurised, oil/gas separated design

Before You Install

  • Confirm fitment for your exact BMW R 1200 GS model and year before installation
  • Check that the supplied spring rate and setup suit your typical riding load and usage
  • Installation should be carried out with correct torque procedures and a post-install suspension check

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM13-P4729-TR
Model # 46BM13-P4729-TR
Barcode # 46BM13P4729TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 402.0
Spring Rate Standard 150 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 82.0
Fitted Spring 150-205

You May Also Like

Related products

More From This Category