The TracTive eX-CITE rear shock for the BMW R 1250 RS is a closed, pressurised monotube unit with an external reservoir and a separating piston to keep the gas and oil managed under sustained use. This architecture helps maintain consistent damping behaviour compared with non-pressurised designs. It is supplied with a spring and is built as a complete replacement rear shock assembly.

Design & features

Closed, pressurised monotube shock design.
External reservoir with oil/gas separation via a separating piston.
Coil spring fitted.

Tuning Controls

Rebound damping adjustment.

Who is this for?

Riders who want a serviceable rear shock with an external reservoir design and rebound adjustability.
Owners setting up the bike for their load and riding conditions where controlled damping is a priority.

Before You Install

Confirm motorcycle fitment for BMW R 1250 RS prior to ordering.
Check clearances around the reservoir and ensure hose/positioning (where applicable) will not interfere with bodywork or moving parts.
Have sag and rebound set after installation to suit rider weight and typical load.

Serviceability/Lifecycle

Designed as a rebuildable, serviceable suspension component.
Periodic servicing helps keep damping performance consistent over time.

Is It Right For You?

Suitable if you want a pressurised reservoir shock with rebound adjustment.
If you require compression or electronic adjustment, choose a different configuration.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

When a claim is made under the warranty, the following conditions have to be met:

You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
The product has to be installed and adjusted as described in the instructions
The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.

SKU	46BM15-P3872-TR-03
Model #	46BM15-P3872-TR-03
Brand	TracTive Suspension
Shipping Weight	5.0000kg
Shipping Size	0.200 x 0.200 x 0.400m
Unit Of Measure	ea
Type	eX-CITE