The Tractive eX-CITE Shock for the BMW K 1600 Bagger is a closed, pressurised rear shock built around a sealed cartridge design to improve consistency under load and heat. This unit uses an internal oil/gas separation piston (not an emulsion layout) to better control damping stability over long rides. Adjustment is focused on rebound, making it a straightforward option when you want more control without added complexity.

Design & features

  • Closed, pressurised shock with a sealed cartridge architecture
  • Internal oil/gas separation piston for more consistent damping than emulsion designs
  • Model-specific fitment for BMW K 1600 Bagger applications

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

This shock is supplied with a factory baseline tune intended to suit general road use. Final performance depends on correct spring rate and sag for your load and riding conditions.

Before You Install

  • Confirm fitment for your exact BMW K 1600 Bagger model and year range
  • Inspect linkage and mounting hardware condition before installation
  • Plan to set rider sag after installation to match your typical load (solo, luggage, or passenger use)

Serviceability/Lifecycle

As a sealed, pressurised design with oil/gas separation, this shock is intended to maintain damping consistency over time. Routine inspection and periodic servicing help keep performance stable as mileage accumulates.

Is It Right For You?

  • Suitable if you want a high-quality, pressurised shock with simple rebound tuning
  • A good match for riders prioritising consistent damping feel on a heavier touring platform

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM17-P1112-TR
Model # 46BM17-P1112-TR
Barcode # 46BM17P1112TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Electronic
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 331.0
Spring Rate Standard 150 N/mm
Type Code eX-CITE
Stroke Metal to Metal (mm) 57.0
Fitted Spring 150-160

You May Also Like

More From This Category