The Tractive eX-CITE Shock for the BMW R 1200 RT is a 38 mm rear shock built around a closed, pressurised damper to keep the oil and gas separated for consistent damping. It uses a piggyback reservoir design rather than a remote hose setup. This version is electronic, intended to integrate with the bike’s electronic control system rather than relying on manual clicker-style adjusters.

Design & features

  • Closed, pressurised shock construction to reduce aeration and help maintain consistent damping.
  • Oil/gas separation via an internal separation piston (not an emulsion design).
  • Piggyback reservoir layout.
  • Electronic control architecture (non-manual adjustment format).

Tuning Controls

  • Electronic damping adjustment (electronically controlled rather than manual compression/rebound adjusters).
  • Spring fitted (spring-rate details not provided in the input data).

Base Setup (factory preset)

This shock is supplied with an internal baseline calibration intended to work with its electronic control. No specific factory settings, spring rate, or calibration details are provided in the input data.

Before You Install

  • Confirm your motorcycle’s electronic suspension compatibility and required connectors before fitment.
  • Inspect available clearance around the piggyback reservoir location on the bike.
  • Verify you have the correct mounting hardware and any model-specific accessories required (not listed in the input data).

Serviceability/Lifecycle

As a closed, pressurised shock with a separated gas chamber, this design is intended to be serviceable. Service intervals and service procedures are not specified in the input data.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 38BM14-P1154-TR
Model # 38BM14-P1154-TR
Barcode # 38BM14P1154TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Electronic
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 373.5
Spring Rate Standard 60 N/mm
Spring Free Length (mm) 180
Type Code eX-CITE
Stroke Metal to Metal (mm) 61.0
Fitted Spring 60-180

You May Also Like

More From This Category