The Tractive X-TREME Shock for the BMW S 1000 XR is a 46 mm rear shock built around a closed, pressurised architecture with an oil/gas separation piston. This design helps maintain damping consistency and reduces aeration under sustained use. It is a spring-equipped unit and includes a hydraulic preload adjuster.

Design & features

  • Closed, pressurised shock design
  • Oil/gas separated via internal separation piston
  • Spring-equipped configuration
  • Hydraulic preload adjuster for easier load changes

Tuning Controls

  • Triple-adjustable damping: compression, rebound, and an additional compression circuit (high/low speed not specified)
  • Manual adjustment (no electronic damping indicated)

Base Setup (factory preset)

This shock is supplied with a factory baseline tune intended to be adjusted to suit rider weight, typical load, and riding conditions. Fine-tuning is done via preload and the external damping adjusters.

Before You Install

  • Confirm fitment to your exact BMW S 1000 XR variant and model year before installation
  • Set sag and preload for your normal riding load prior to changing damping settings
  • If you are changing spring rate, ensure the shock is configured accordingly before setup

Serviceability/Lifecycle

As a pressurised, oil/gas-separated shock, this unit is designed to be maintained through periodic servicing to keep damping performance consistent over time.

Is It Right For You?

This option suits riders who want broad tuning range through triple damping adjustment along with the convenience of a hydraulic preload adjuster for varying loads.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM15-T8592-TR
Model # 46BM15-T8592-TR
Barcode # 46BM15T8592TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Factory Lowered
Shock Length Eye to Eye (mm) 342.0
Spring Rate Standard 120 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 53.0
Fitted Spring 120-160