The TracTive X-TREME rear shock for the BMW R 1300 GS is a closed, pressurised monotube design with a separating piston, built to deliver consistent damping across changing conditions. It uses an external reservoir mounted to the shock body and includes a spring with a fixed hydraulic preload adjuster. Damping is externally adjustable with separate compression and rebound controls.

Design & features

  • Closed, pressurised monotube shock with oil and gas separated by a piston for stable damping
  • External reservoir fixed to the shock body to support thermal stability and consistent feel
  • Supplied with spring
  • Fixed hydraulic preload adjuster for practical ride-height and load compensation

Tuning Controls

  • Compression damping adjustment
  • Rebound damping adjustment
  • Hydraulic preload adjustment (fixed-position adjuster unit)

Base Setup (factory preset)

This shock is supplied with a baseline tune intended as a starting point. Use the compression, rebound and preload adjusters to suit rider weight, luggage and riding conditions.

Before You Install

  • Confirm fitment for your BMW R 1300 GS and check the shock’s mounting orientation, including reservoir clearance
  • Set preload for your typical load before fine-tuning damping
  • After installation, re-check fasteners and clearances through full suspension travel

Serviceability/Lifecycle

As a closed, pressurised design, servicing should be performed by a qualified suspension technician to maintain correct gas pressure, oil condition and sealing performance.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM24-T7158-TR
Model # 46BM24-T7158-TR
Barcode # 46BM24T7158TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression High + Low Speed
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 402.5
Spring Rate Standard 50 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 108.5
Notes PDSII anti-bottoming
Fitted Spring 50-205

More From This Category