The TracTive X-TREME Shock for the BMW R 1300 GS is a closed, pressurised damper built around a sealed internal cartridge for consistent oil control. This architecture helps reduce aeration under hard use and supports stable damping behaviour over longer rides. This “Basic” configuration is supplied with a spring and is intended as a complete rear shock replacement.

Design & features

  • Closed, pressurised design with a sealed internal cartridge to help maintain consistent damping performance.
  • Remote reservoir layout.
  • Supplied with a spring.

Tuning Controls

  • Triple-adjustable damping: separate compression and rebound tuning plus an additional damping adjustment channel.
  • No electronic adjustment is indicated for this model.

Before You Install

  • Confirm fitment for your exact BMW R 1300 GS variant before installation.
  • Set sag and baseline adjusters after installation to suit rider load and typical use.

Serviceability/Lifecycle

  • Designed as a rebuildable shock absorber; routine servicing helps maintain performance over time.

Is It Right For You?

  • Suitable for riders wanting broad external damping adjustment range in a pressurised, reservoir-backed rear shock.
  • If you require electronic control, this specific configuration does not indicate electronics.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM24-T7164-TR
Model # 46BM24-T7164-TR
Barcode # 46BM24T7164TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression High + Low Speed
Seat Height Change (mm) Raised +25
Shock Length Eye to Eye (mm) 407.5
Spring Rate Standard 50 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 113.5
Notes PDSII anti-bottoming
Fitted Spring 50-205

More From This Category